[TR] More on valve adjusting

[Geo & Kathleen Hahn]

In any case going a couple thou more than stock isn't a bad idea.  Even if 
the cam is stock this gives you a margin of protection as you definitely do 
not wan the clearance to tight.

Geo

----- Original Message ----- 
From: "Randall" <tr3driver at ca.rr.com>
To: "'jim hearn'" <jimhearn1 at comcast.net>; <triumphs at autox.team.net>
Sent: Friday, August 24, 2007 8:24 AM
Subject: Re: [TR] More on valve adjusting


>> Thanks guys!  Also, if my TR6 has an unknown but definitely
>> hotter cam, are the valves still adjusted with the factory settings?
>
> Usually, though not always, 'hot' cams take more clearance than stock.