[TR] TR6 Intake Manifold Brass Adaptor

[mrv8q at aim.com]

Hello, listers, what are you using to replace the Brass Adaptor on the 
TR6 intake manifold?
Plate BH of #1 Spare parts catalog, BH29, #UKC2313... This is the 
adaptor from the EGR pipe,
into the manifold; Coarse thread on the manifold side, fine thread on 
the pipe side...
Not available from the usual suspects.

Also, concerning the manifold itself, is there a common cure for the 
deteriorating water pipe
thru the manifold? Two machine shops I took it to shook their heads; 
one suggested clamping
a copper pipe underneath.... don't know if that will foul the linkage. 
Any and all suggestions welcome!

Best, Kevin Browne
________________________________________________________________________
Check Out the new free AIM(R) Mail -- Unlimited storage and 
industry-leading spam and email virus protection.