[TR] Heat Shield/Sound Barrier Installed - Carpet Next

[Marty Clark]

I've finished up the installation of the heat shield/sound barrier this
morning. It installed fairly easily, like very thick wallpaper. I bought a
36 sg ft pack of Damplifier Pro from Second Skin (NFI) for $150 and have 1
and 2/3 sheets left over. I did not do the doors. It was difficult getting
it on the upper part of the firewall and footwell. I should have removed the
tranny cover to cover it instead of leaving it in place. After awhile I
figured out to use a rolled up towel to put under my elbows when applying it
in the footwells because my elbows were leaving dimples in the pieces
covering the floor. I have to re roll the floors with a wooden roller to get
them out. Final install pics here:
http://www.dctra.org/files/1974_TR6_Carpet_Install/74_TR6_Carpet_Install_44.jpg
http://www.dctra.org/files/1974_TR6_Carpet_Install/74_TR6_Carpet_Install_45.jpg
http://www.dctra.org/files/1974_TR6_Carpet_Install/74_TR6_Carpet_Install_46.jpg

-- 
Marty Clark
Gilbert, AZ
1974 TR6 CF17352U
http://www.triumphowners.com/798