[TR] Rear shock conversion

[Randall]

> There shouldn't be any
> more stress on the supporting cross member that held the 
> Armstrong levers after installing the conversions. 

Brian, I can't really help with your question; but physics says the above
statement isn't quite true.  The tube shock conversions always have the
shock farther from the mount than the link for the lever shock was.  So even
if the force transmitted from the suspension is the same, it has a longer
lever arm to the mount, meaning more force at the mount.  

Plus, most people do the tube shock thing so they can run stiffer shocks,
which means that for any given bump/speed, there will be more force
transmitted from the suspension. 

Randall 
(Tedious but unavoidable disclaimer follows) 






CONFIDENTIALITY. This electronic mail and any files transmitted with it may contain information proprietary to NavCom Technology, Inc., or one of its affiliates, and are intended solely for the use of the individual or entity to whom they are addressed, shall be maintained in confidence and not disclosed to third parties without the written consent of the sender. If you are not the intended recipient or the person responsible for delivering the electronic mail to the intended recipient, be advised that you have received this electronic mail in error and that any use, dissemination, forwarding, printing, or copying of this electronic mail is strictly prohibited. If you have received this electronic mail in error, please immediately notify the sender by return mail.