Obviously this post isn't about Sunbeam or Jensen Cars, unless you have installed a Ford BW T5 transmission in your car with an electronic speedometer. My T5 is from a 1994-1998 Mustang V6 car. The speedometer sender has 2 wires coming out and they are both white. My electronic speedometer has its own cable that plugs into the speedometer and the other end has a black and a white wire. <div><br></div><div>My question is, "Since the plug on the transmission sending unit has 2 white wires, does it matter how I connect the black and white wires from the harness? If it matters then how do I figure out which of the 2 white wires is signal and which one is ground?</div><div><br></div><div>Sorry for being off topic, but it might relate to others who have converted to a T5 transmission. </div><div><br></div><div>TIA,</div><div>Dan Eiland <br><br><div id="ymail_android_signature"><a id="ymail_android_signature_link" href="https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature&af_web_dp=https://more.att.com/currently/imap">Sent from AT&T Yahoo Mail on Android</a></div></div>