<html><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8"></head><body dir="auto"><div dir="auto">Thanks Tom.</div><div dir="auto"><br></div><div dir="auto"><br></div><div dir="auto"><br></div><div id="composer_signature" dir="auto"><div style="font-size:12px;color:#575757" dir="auto">Sent from my Galaxy</div></div><div dir="auto"><br></div><div><br></div><div align="left" dir="auto" style="font-size:100%;color:#000000"><div>-------- Original message --------</div><div>From: Tom Hall <modtiger@comcast.net> </div><div>Date: 1/18/22 8:26 PM (GMT-05:00) </div><div>To: tigers@autox.team.net </div><div>Subject: [Tigers] Air Cleaner Spacer </div><div><br></div></div>On 1/18/2022 4:42 PM, jimdamelio via Tigers wrote:<br>> The pictures shows the difference in the reproduction verse the <br>> original. The pictures show a 1/4" difference in depth. I know of <br>> two examples. Maybe there was a change in tooling and the first 100's <br>> fit Holley carbs, but these two don't. The cast one doesn't fit, but <br>> stated it needed a spacer. I know because I bought № 45 when they <br>> came out. I'm sure Eric's will need a spacer too.<br>><br>Here's a drawing of the piece I made to fit the new stamped Air Cleaner <br>to allow it to fit Mike Woods 4 bbl Tiger in June 2015. I never made <br>any more.<br><br><br>-- <br>Tom Hall<br>ModTiger Engineering LLC<br>5712 San Luis Court<br>Pleasanton, CA 94566<br>(925)462-3876<br>modtiger@comcast.net<br>http://tigerengineering.net/<br><br>_______________________________________________<br><br>tigers@autox.team.net<br><br>Donate: http://www.team.net/donate.html<br>Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive<br><br>Unsubscribe: http://autox.team.net/mailman/options/tigers/jimdamelio@verizon.net<br><br><br></body></html>