<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
<p>The roller cam 302 is a nice upgrade. Others who have done the
swap can better advise but the bellhousing you now have is a 5
bolt and the 302 bellhousing is a 6 bolt. The bolt pattern on the
Toploader 4 speed is the older style. I'm not 100% sure but some
bellhousings I believe have both transmission bolt patterns.
Also, as I recall there was a (likely rare) cast iron bellhousing
that have both 5 and 6 bolt block arrangement. I believe certain
scatter shields had that too. You will need the 302 flywheel and
there are different teeth counts on the flywheel. So, how that all
mates up with the starter I do not know. As I said, others have
done the swap and can best advise. I just know what the potential
issues are..., not how to solve them.</p>
<p><br>
</p>
<p>Keep us posted on the project. It can be inspirational (says the
guy whose Tiger has been on jackstands for almost 22 years now).
And yes, I can understand how the interruptions happen and the
desire to not have multiple cars disassembled and scattered about.
All the best.<br>
</p>
<p><br>
</p>
<p><br>
</p>
<div class="moz-cite-prefix">On 12/3/2021 6:14 PM, steve wick via
Tigers wrote:<br>
</div>
<blockquote type="cite"
cite="mid:SA1PR06MB83561A6E725A84E67133CDC9D86B9@SA1PR06MB8356.namprd06.prod.outlook.com">
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<style type="text/css" style="display:none;">P {margin-top:0;margin-bottom:0;}</style>
<div style="font-family: Calibri, Helvetica, sans-serif;
font-size: 12pt; color: rgb(0, 0, 0);">
This will be a long post, so please bear with me. I've had my
Tiger for 20 years, but only drove it occasionally. I had
constant problems with the wiring and fuel system that left me
stranded several times. The last 10 years or so, I haven't
driven it more than 100 miles per year, mainly due to work,
health issues, time and the unreliability issue. I plan on going
through my Tiger this winter, updating the wiring harness and,
as a bonus, getting it ready to go back to the original paint
color (Midnight Blue) throughout the car. As part of that, I was
going to pull the engine and transmission. </div>
<div style="font-family: Calibri, Helvetica, sans-serif;
font-size: 12pt; color: rgb(0, 0, 0);">
First question. Is the engine compartment body color or black?
My car was completely repainted, inside and out, in the 70's to
some shade of red that now needs serious help. The engine
compartment was painted black. I figure if I'm going to repaint
everything, I might as well do it right.</div>
<div style="font-family: Calibri, Helvetica, sans-serif;
font-size: 12pt; color: rgb(0, 0, 0);">
Second question. I've heard of people pulling the engine from
the top and from the bottom. It's just me, and my bench-pressing
days are way behind me, so I won't be lifting the front of the
car myself if I pull from the bottom. I don't see a good place
to attach a hoist. I have a 4-post car lift, so can position the
front of the car over the edge of the platform, block up the
frame under the A pillar and chain the rear frame rails down and
lift the whole car in the air, minus the front
crossmember/engine/tranny, or remove the transmission, strip the
engine to the block and heads and pull from the top. Which would
be the best way, and why?</div>
<div style="font-family: Calibri, Helvetica, sans-serif;
font-size: 12pt; color: rgb(0, 0, 0);">
Last question. As long as the engine/tranny are out, I'm going
to "refresh" them. I'm a hot rodder at heart, but don't want to
mess up a rare car like a Tiger. I'm looking for something just
to drive and have fun with, without getting smoked by a Prius.
I'm considering using a roller cam 302 and a 5 speed, because of
the ZDDP issue, parts availability, reliability, small boost in
power, etc. How much do I hurt the value of the car by having
the original engine/tranny available but newer stuff installed,
vs. rebuilding the stock units?</div>
<div style="font-family: Calibri, Helvetica, sans-serif;
font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div style="font-family: Calibri, Helvetica, sans-serif;
font-size: 12pt; color: rgb(0, 0, 0);">
Thanks guys. Looking forward to everyone's input and opinion.</div>
<div style="font-family: Calibri, Helvetica, sans-serif;
font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div style="font-family: Calibri, Helvetica, sans-serif;
font-size: 12pt; color: rgb(0, 0, 0);">
Steve</div>
<br>
<fieldset class="moz-mime-attachment-header"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
<a class="moz-txt-link-abbreviated" href="mailto:tigers@autox.team.net">tigers@autox.team.net</a>
Donate: <a class="moz-txt-link-freetext" href="http://www.team.net/donate.html">http://www.team.net/donate.html</a>
Archive: <a class="moz-txt-link-freetext" href="http://www.team.net/pipermail/tigers">http://www.team.net/pipermail/tigers</a> <a class="moz-txt-link-freetext" href="http://autox.team.net/archive">http://autox.team.net/archive</a>
Unsubscribe: <a class="moz-txt-link-freetext" href="http://autox.team.net/mailman/options/tigers/atwittsend@verizon.net">http://autox.team.net/mailman/options/tigers/atwittsend@verizon.net</a>
</pre>
</blockquote>
</body>
</html>