<div dir="auto">Yes, Fram ph3600 or Ford FL400 will fit without grinding the engine mount.</div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sat, Jul 3, 2021, 3:41 PM Terry Lawell <<a href="mailto:tlawell@austin.rr.com">tlawell@austin.rr.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi Ron,<br>
<br>
It turns out Summit had the right adapter for the kit, the sales <br>
person just didn't know it. They have sent the adapter to me and it fits <br>
correctly in the block as well as in the kit. The only problem was the <br>
oil filter they sent me was incorrect - it hits up against the oil pan. <br>
Is it the ph3600 that is slimmer and fits that kit?<br>
I also found another problem - the oil line from the oil pressure <br>
gauge was cracked and leaking. when I disconnected the oil line fitting, <br>
I also took off the fitting that goes into the block. It was very <br>
difficult to get off and I am concerned that someone either put a <br>
fitting in there with the wrong threads or stripped the threads when <br>
they installed it. Do you know what size those threads are? It appears <br>
to be a british standard pipe thread. I had to use whitworth wrenches to <br>
get both the pressure fitting nut and the fitting to the block off. Any <br>
info on these fittings would be much appreciated.<br>
<br>
Cheers, Terry<br>
<br>
<br>
On 7/3/21, 7:45 AM, Ron Fraser wrote:<br>
> Terry<br>
> 1st - I would contact Summit to make sure that oil filter kit did<br>
> not come with an adaptor or if it is missing from your kit.<br>
> 2nd - does Summit have the adaptor needed for this kit?<br>
><br>
> C20Z 6890-C seems to be the Ford part number for the adaptor - 3/4 x16<br>
> thread and 1 1/16 x 12 thread<br>
> You need to check that this is correct for your oil filter kit.<br>
><br>
> <a href="https://www.npdlink.com/search/products?search_terms=fitting%2Boil%2Bfilter&" rel="noreferrer noreferrer" target="_blank">https://www.npdlink.com/search/products?search_terms=fitting%2Boil%2Bfilter&</a><br>
> top_parent=200001&year=<br>
><br>
> see if 6890-A is the part you need.<br>
><br>
> Ron Fraser<br>
><br>
> -----Original Message-----<br>
> From: Tigers <<a href="mailto:tigers-bounces@autox.team.net" target="_blank" rel="noreferrer">tigers-bounces@autox.team.net</a>> On Behalf Of Terry Lawell via<br>
> Tigers<br>
> Sent: Thursday, July 01, 2021 8:34 PM<br>
> To: <a href="mailto:tigers@autox.team.net" target="_blank" rel="noreferrer">tigers@autox.team.net</a><br>
> Subject: [Tigers] 90 degree oil filter adaptor<br>
><br>
> I purchased a 90 degree oil filter adapter from Summit Racing and when it<br>
> arrived I realized it did not have the adapter for the block, though the<br>
> salesman told me it came with it. Does anyone know where I can get the<br>
> adapter? I think it is 1.16" threads to the block and 13/16" threads to the<br>
> adapter.<br>
><br>
> Cheers, Terry<br>
> _______________________________________________<br>
><br>
> <a href="mailto:tigers@autox.team.net" target="_blank" rel="noreferrer">tigers@autox.team.net</a><br>
><br>
> Donate: <a href="http://www.team.net/donate.html" rel="noreferrer noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
> Archive: <a href="http://www.team.net/pipermail/tigers" rel="noreferrer noreferrer" target="_blank">http://www.team.net/pipermail/tigers</a> <a href="http://autox.team.net/archive" rel="noreferrer noreferrer" target="_blank">http://autox.team.net/archive</a><br>
><br>
> Unsubscribe:<br>
> <a href="http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com" rel="noreferrer noreferrer" target="_blank">http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com</a><br>
><br>
><br>
><br>
<br>
_______________________________________________<br>
<br>
<a href="mailto:tigers@autox.team.net" target="_blank" rel="noreferrer">tigers@autox.team.net</a><br>
<br>
Donate: <a href="http://www.team.net/donate.html" rel="noreferrer noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
Archive: <a href="http://www.team.net/pipermail/tigers" rel="noreferrer noreferrer" target="_blank">http://www.team.net/pipermail/tigers</a> <a href="http://autox.team.net/archive" rel="noreferrer noreferrer" target="_blank">http://autox.team.net/archive</a><br>
<br>
Unsubscribe: <a href="http://autox.team.net/mailman/options/tigers/sabre2tgr@gmail.com" rel="noreferrer noreferrer" target="_blank">http://autox.team.net/mailman/options/tigers/sabre2tgr@gmail.com</a><br>
<br>
<br>
</blockquote></div>