<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
Missing clip is bad, it can fall into the pan.<br>
You can get the pan off in the car.. I think you might have to take
out the starter and re-gasket it.<br>
I would try more to to re-seat it or get the distributor back first.<br>
It should turn pretty easily when in the pump though, should be some
drag though.<br>
I have a special tool to spin it but a socket should work.. put a
drill on it an see if you can spin it<br>
to get oil pressure. Drill needs to be on reverse. You'll get more
resistance at speed.<br>
Gary<br>
<br>
<br>
<br>
<div class="moz-cite-prefix">On 8/13/2020 5:45 AM, R Flynn via
Tigers wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CAL1UyNaCpykbacK_4usUbfw9P9tcMFYrpDzZEO5BccfU-MP-yg@mail.gmail.com">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<div>
<div dir="auto">A bit more diagnostic information</div>
</div>
<div dir="auto">- when I run a stiff hanger wire down the side of
the shaft, I do not feel the retaining clip that should be
present</div>
<div dir="auto">- Beveled edge does visually appear to be at the
top</div>
<div dir="auto">- There is no residue in the distributor shaft
(i.e. does seem like the last person in there stuck the shaft
into the distributor just to get it to seat)</div>
<div dir="auto">- I can get a socket on the oil pump shaft and
spin it but there is zero resistance, not sure if that is
normal?</div>
<div dir="auto"><br>
</div>
<div dir="auto">I am a bit concerned that the shaft has come
unseated from the oil pump at the bottom end given there does
not appear to be any retaining clip & it leans over against
the wall of the hole it is in.</div>
<div dir="auto"><br>
</div>
<div dir="auto">Starting to wonder if I should drop the oil pan
(which I believe I can do without removing the entire engine,
appreciate any input on that) and do things properly.</div>
<div><br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Wed, Aug 12, 2020 at 9:40
PM Gary <<a href="mailto:garywinblad@comcast.net"
moz-do-not-send="true">garywinblad@comcast.net</a>>
wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex"><br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<div><br>
<br>
Sometimes they are just difficult...<br>
<br>
<br>
IIRC, one time we could see the drive shaft was off to one
side. We<br>
<br>
jacked the car on that side so it leaned to the other side<br>
<br>
<br>
which made it more vertical...<br>
<br>
<br>
Good luck,<br>
<br>
<br>
Gary</div>
<div><br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<div>On 8/12/2020 4:47 PM, R Flynn via<br>
<br>
Tigers wrote:<br>
<br>
<br>
</div>
<br>
<br>
</div>
<div>
<blockquote type="cite"><br>
<br>
<br>
<br>
<div dir="auto">In trying to replace the distributor
after<br>
<br>
changing my intake manifold on the ‘65 289 in my
Tiger, I am<br>
<br>
struggling to get it to slide down over the oil pump
shaft,<br>
<br>
which seems to be leaning over.</div>
<br>
<br>
<div dir="auto">- tried jiggling the rotor</div>
<br>
<br>
<div dir="auto">- tried turning the crank with a ratchet
while<br>
<br>
applying gentle pressure to the distributor, though I
was doing<br>
<br>
both</div>
<br>
<br>
<div dir="auto">- tried using a long socket &
extension to put<br>
<br>
the oil pump shaft itself in different orientations</div>
<br>
<br>
<div dir="auto"><br>
<br>
<br>
</div>
<br>
<br>
<div dir="auto">My next attempts will involve</div>
<br>
<br>
<div dir="auto">- having someone else push down while I
turn the<br>
<br>
crap with a ratchet</div>
<br>
<br>
<div dir="auto">- trying to pack some grease around the
shaft with<br>
<br>
a screwdriver prior to inserting the distributor to
keep the oil<br>
<br>
pump shaft more centered</div>
<br>
<br>
<div dir="auto"><br>
<br>
<br>
</div>
<br>
<br>
<div dir="auto">Would welcome any suggestions,
solutions, or words<br>
<br>
of wisdom.</div>
<br>
<br>
<div dir="auto"><br>
<br>
<br>
</div>
<br>
<br>
<div dir="auto">Cheers in advance,</div>
<br>
<br>
<div dir="auto"><br>
<br>
<br>
</div>
<br>
<br>
<div dir="auto">Rick</div>
<br>
<br>
<div dir="auto"><br>
<br>
<br>
</div>
<br>
<br>
-- <br>
<br>
<br>
<div dir="ltr" data-smartmail="gmail_signature">rick<br>
<br>
<br>
B9471206: <a
href="http://www.tigersunited.com/car_show/flynn_r/default.asp"
target="_blank" moz-do-not-send="true">http://www.tigersunited.com/car_show/flynn_r/default.asp</a></div>
<br>
<br>
<br>
<br>
<br>
<fieldset></fieldset>
<br>
<br>
</blockquote>
</div>
<div>
<blockquote type="cite">
<pre>_______________________________________________
<a href="mailto:tigers@autox.team.net" target="_blank" moz-do-not-send="true">tigers@autox.team.net</a>
Donate: <a href="http://www.team.net/donate.html" target="_blank" moz-do-not-send="true">http://www.team.net/donate.html</a>
Archive: <a href="http://www.team.net/pipermail/tigers" target="_blank" moz-do-not-send="true">http://www.team.net/pipermail/tigers</a> <a href="http://autox.team.net/archive" target="_blank" moz-do-not-send="true">http://autox.team.net/archive</a>
Unsubscribe: <a href="http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net" target="_blank" moz-do-not-send="true">http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net</a>
</pre>
<br>
<br>
</blockquote>
<br>
<br>
<br>
<br>
<br>
</div>
<br>
<br>
<br>
<br>
_______________________________________________<br>
<br>
<br>
<br>
<a href="mailto:tigers@autox.team.net" target="_blank"
moz-do-not-send="true">tigers@autox.team.net</a><br>
<br>
<br>
<br>
Donate: <a href="http://www.team.net/donate.html"
rel="noreferrer" target="_blank" moz-do-not-send="true">http://www.team.net/donate.html</a><br>
<br>
Archive: <a href="http://www.team.net/pipermail/tigers"
rel="noreferrer" target="_blank" moz-do-not-send="true">http://www.team.net/pipermail/tigers</a>
<a href="http://autox.team.net/archive" rel="noreferrer"
target="_blank" moz-do-not-send="true">http://autox.team.net/archive</a><br>
<br>
<br>
<br>
Unsubscribe: <a
href="http://autox.team.net/mailman/options/tigers/flynnr2@gmail.com"
rel="noreferrer" target="_blank" moz-do-not-send="true">http://autox.team.net/mailman/options/tigers/flynnr2@gmail.com</a><br>
<br>
<br>
<br>
<br>
<br>
</blockquote>
</div>
</div>
-- <br>
<div dir="ltr" class="gmail_signature"
data-smartmail="gmail_signature">rick<br>
B9471206: <a
href="http://www.tigersunited.com/car_show/flynn_r/default.asp"
target="_blank" moz-do-not-send="true">http://www.tigersunited.com/car_show/flynn_r/default.asp</a></div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
<a class="moz-txt-link-abbreviated" href="mailto:tigers@autox.team.net">tigers@autox.team.net</a>
Donate: <a class="moz-txt-link-freetext" href="http://www.team.net/donate.html">http://www.team.net/donate.html</a>
Archive: <a class="moz-txt-link-freetext" href="http://www.team.net/pipermail/tigers">http://www.team.net/pipermail/tigers</a> <a class="moz-txt-link-freetext" href="http://autox.team.net/archive">http://autox.team.net/archive</a>
Unsubscribe: <a class="moz-txt-link-freetext" href="http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net">http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net</a>
</pre>
</blockquote>
<br>
</body>
</html>