<html><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8"></head><body><div><div><font face="sans-serif" original_font_attr="-1" original_line_height_attr="">Here's my 2 cents on the fasteners. The metal rivets were part number <a href="tel:2232727" original_font_attr="-1" original_line_height_attr="">2232727</a>. They were available in the late 70's from Chrysler. I sold plenty of them and by mistake sold the ones I was saving for myself. If I remember correctly, Doug Jennings said he had to make a special tip for his rivet gun because the rivets were so small. Then you had to be careful to not chip the paint or dent the metal when the rivet went pop.</font></div><div><font face="sans-serif"><br></font></div><div><font face="sans-serif" original_font_attr="-1" original_line_height_attr=""><a href="tel:7096040" original_font_attr="-1" original_line_height_attr="">7096040</a> were the plastic replacements for <a href="tel:2232727" original_font_attr="-1" original_line_height_attr="">2232727</a>. Much easier to use. I've sold larger ones of these to replace the rivets on the valance panel for the lower grill moulding.</font></div><div><font face="sans-serif" original_font_attr="-1" original_line_height_attr=""><br></font></div><div><font face="sans-serif" original_font_attr="-1" original_line_height_attr=""><img id="HEV1572820777956" src="cid:storage_emulated_0_Download_7096040_jpg_1572820777956" name="storage_emulated_0_Download_7096040_jpg_1572820777956" width="304" height="171" onmouseover="imageMousePointerUpdate(true)" onmouseout="imageMousePointerUpdate(false)"></font></div><div><font face="sans-serif" original_font_attr="-1" original_line_height_attr=""><br></font></div><div><font face="sans-serif" original_font_attr="-1" original_line_height_attr=""><img id="HEV1572820790996" src="cid:storage_emulated_0_Download_7096040B_jpg_1572820790996" name="storage_emulated_0_Download_7096040B_jpg_1572820790996" width="304" height="171" onmouseover="imageMousePointerUpdate(true)" onmouseout="imageMousePointerUpdate(false)"></font></div><div><font face="sans-serif"><br></font></div><div><font face="sans-serif" original_font_attr="-1" original_line_height_attr=""><a href="tel:7208008" original_font_attr="-1" original_line_height_attr="">7208008</a> fixing stud is a plastic 'tee' piece that was used in places like the rear of the door and rear quarter. Places that were accessible from the back and needed extra holding power.</font></div><div><font face="sans-serif" original_font_attr="-1" original_line_height_attr=""><br></font></div><div><font face="sans-serif" original_font_attr="-1" original_line_height_attr=""><img id="HEV1572820810448" src="cid:storage_emulated_0_Download_7208008_jpg_1572820810448" name="storage_emulated_0_Download_7208008_jpg_1572820810448" width="304" height="171" onmouseover="imageMousePointerUpdate(true)" onmouseout="imageMousePointerUpdate(false)"></font></div><div><font face="sans-serif" original_font_attr="-1" original_line_height_attr=""><br></font></div><div><font face="sans-serif" original_font_attr="-1" original_line_height_attr=""><img id="HEV1572820821589" src="cid:storage_emulated_0_Download_7508008B_jpg_1572820821589" name="storage_emulated_0_Download_7508008B_jpg_1572820821589" width="304" height="171" onmouseover="imageMousePointerUpdate(true)" onmouseout="imageMousePointerUpdate(false)"></font></div><div><font face="sans-serif"><br></font></div><div><font face="sans-serif" original_font_attr="-1" original_line_height_attr=""><a href="tel:7208009" original_font_attr="-1" original_line_height_attr="">7208009</a> sealing bush is a round plastic piece with a step moulded into it that slips over the fixing stud.</font></div><div><font face="sans-serif" original_font_attr="-1" original_line_height_attr=""><br></font></div><div><font face="sans-serif" original_font_attr="-1" original_line_height_attr=""><img id="HEV1572820852361" src="cid:storage_emulated_0_Download_7208009_jpg_1572820852361" name="storage_emulated_0_Download_7208009_jpg_1572820852361" width="304" height="171" onmouseover="imageMousePointerUpdate(true)" onmouseout="imageMousePointerUpdate(false)"></font></div><div><font face="sans-serif" original_font_attr="-1" original_line_height_attr=""><br></font></div><div><font face="sans-serif" original_font_attr="-1" original_line_height_attr=""><img id="HEV1572820860521" src="cid:storage_emulated_0_Download_7208009B_jpg_1572820860521" name="storage_emulated_0_Download_7208009B_jpg_1572820860521" width="304" height="171" onmouseover="imageMousePointerUpdate(true)" onmouseout="imageMousePointerUpdate(false)"></font></div><div><font face="sans-serif"><br></font></div><div original_font_attr="-1" original_line_height_attr=""><a href="tel:7208029" original_font_attr="-1" original_line_height_attr="">7208029</a> thread cutting fastener was superseded to <a href="tel:9034096" original_font_attr="-1" original_line_height_attr="">9034096</a>. These are just sheet metal nuts that screw on to the fixing stud and makes treads as it goes. </div><div original_font_attr="-1" original_line_height_attr=""><br></div><div original_font_attr="-1" original_line_height_attr=""><img id="HEV1572820883466" src="cid:storage_emulated_0_Download_9034096_jpg_1572820883466" name="storage_emulated_0_Download_9034096_jpg_1572820883466" width="304" height="171" onmouseover="imageMousePointerUpdate(true)" onmouseout="imageMousePointerUpdate(false)"></div><div><br></div><div original_font_attr="-1" original_line_height_attr="">All of the parts begining with 7 were for the Imp. Of course they held the side moulding on.</div><div original_font_attr="-1" original_line_height_attr=""><br></div><div original_font_attr="-1" original_line_height_attr="">Hope these come through. Second time sending. Reduced picture size.</div><div></div></div><div><br></div><div><br></div><div><br></div><div id="composer_signature"><div style="font-size:85%;color:#575757" dir="auto">Sent from my Verizon, Samsung Galaxy smartphone</div></div><div><br></div><div style="font-size:100%;color:#000000"></div><div style="font-size:100%;color:#000000"></div><div style="font-size:100%;color:#000000"><!-- originalMessage --><div>-------- Original message --------</div><div>From: Ron Fraser via Tigers <tigers@autox.team.net> </div><div>Date: 11/3/19 11:42 AM (GMT-05:00) </div><div>To: 'John Watertor' <h2otor@aol.com> </div><div>Cc: tigers@Autox.Team.Net </div><div>Subject: Re: [Tigers] side moulding fasteners reply John Watertor </div><div><br></div></div><div class="WordSection1"><p class="MsoNormal">John<o:p></o:p></p><p class="MsoNormal"> Thank you for your information. I don’t think I have ever seen any of the original parts and I’m curious about them.<o:p></o:p></p><p class="MsoNormal">I bought parts from Sunbeam Specialties to install my side mouldings. I made a few threaded fasteners to give a more positive clamp force. <o:p></o:p></p><p class="MsoNormal"><o:p> </o:p></p><p class="MsoNormal">So far the indications are that the parts are from the Imp line due to the starting # of 7 of the part numbers.<o:p></o:p></p><p class="MsoNormal"><o:p> </o:p></p><p class="MsoNormal">I’m also thinking the 7208029 thread cutting fastener was an optional fastener.<o:p></o:p></p><p class="MsoNormal">The number of fasteners did not add up – 46 are needed but the parts list indicated 52 – that is why I think the thread cutter was optional.<o:p></o:p></p><p class="MsoNormal"><o:p> </o:p></p><p class="MsoNormal">I’m still hoping to see picture of the original parts.<o:p></o:p></p><p class="MsoNormal"><o:p> </o:p></p><p class="MsoNormal">Ron Fraser <o:p></o:p></p><p class="MsoNormal"><o:p> </o:p></p><p class="MsoNormal"><b>From:</b> Tigers <tigers-bounces@autox.team.net> <b>On Behalf Of </b>John Watertor via Tigers<br><b>Sent:</b> Saturday, November 02, 2019 7:43 PM<br><b>To:</b> tigers@autox.team.net<br><b>Subject:</b> Re: [Tigers] side moulding fasteners reply John Watertor<o:p></o:p></p><p class="MsoNormal"><o:p> </o:p></p><div><p class="MsoNormal" style="margin-bottom:12.0pt"><span style="font-size:10.0pt;font-family:"Arial",sans-serif;color:black">Don't know if I sent this reply to you correctly?<br><br><o:p></o:p></span></p><div><p class="MsoNormal" style="margin-bottom:12.0pt"><span style="font-size:10.0pt;font-family:"Arial",sans-serif;color:black">-----Original Message-----<br>From: John Watertor <<a href="mailto:h2otor@aol.com">h2otor@aol.com</a>><br>To: tigers-request <<a href="mailto:tigers-request@autox.team.net">tigers-request@autox.team.net</a>><br>Sent: Wed, Oct 30, 2019 2:41 pm<br>Subject: side moulding fasteners reply John Watertor<o:p></o:p></span></p><div id="yiv0340383118"><div><p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif;color:black">In regards to the Tiger side moulding fasteners <o:p></o:p></span></p><div><p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif;color:black"><o:p> </o:p></span></p></div><div><p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif;color:black">The 7096040 clip (40 required ) These were metal rivets with the head sticking out of the body which was round to snap into the chrome side moulding. I needed some many years ago and purchased a plastic package<o:p></o:p></span></p></div><div><p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif;color:black">of them from Rootes with 9 in the package. I used 3 of them and still have 6 left some where in the house, that I haven't seen in years. Some one had 5 or 6 for sale on E-bay several years ago, but I did not want<o:p></o:p></span></p></div><div><p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif;color:black"> to pay $5 or $6 each for them. When I had my Tiger painted I had the body man grind them off because the problem of sanding off the old paint and repainting the car. I replaced them with the plastic fasteners<o:p></o:p></span></p></div><div><p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif;color:black">from the after market parts dealers and are still on the car.<o:p></o:p></span></p></div><div><p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif;color:black"><o:p> </o:p></span></p></div><div><p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif;color:black">The 7208008 fixing stud (6) my guess is the 1/8" square head threaded stud to clamp the chrome side molding to the body. There was one at the front of the front moulding, one on the door, I don't remember where <o:p></o:p></span></p></div><div><p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif;color:black">it was located and one on the back of the back moulding. I twisted mine off while removing them and had to make the replacements by cutting a 1/8" square brass plate from sheet brass, drilling a hole thru, going <o:p></o:p></span></p></div><div><p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif;color:black">to the local hobby shop and buying the small bolts and then soldering the head of the bolt to the 1/8" brass plate.<o:p></o:p></span></p></div><div><p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif;color:black"><o:p> </o:p></span></p></div><div><p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif;color:black">My guess the 7208009 (6) sealing bush is a rubber washer to seal the above fixing stud on assembly.<o:p></o:p></span></p></div><div><p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif;color:black"><o:p> </o:p></span></p></div><div><p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif;color:black">Don't remember using any 7208029 (6) thread cutting fasteners.<o:p></o:p></span></p></div><div><p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif;color:black"><o:p> </o:p></span></p></div><div><p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif;color:black">John Watertor<o:p></o:p></span></p></div><div><p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial",sans-serif;color:black"><o:p> </o:p></span></p></div></div></div></div></div></div></body></html>