<div dir="ltr">Hi,<div><br></div><div>I'm trying to test everything before I install things under the dash.  I'm now trying to test the wiper motor.  There are four wires coming out- red, green, brown and a ground wire on the case.  If I put 12V between the red and green the motor works.  But nothing happens if I put 12V on any other combination of wires.  Shouldn't I be able to get a different speed using another wire?</div><div><br></div><div>Secondary question: is there a diagram that shows which wire goes to which post on the switch?  I have the wiring diagram but it doesn't show how the wires connect to the switch.</div><div><br></div><div>Thanks,</div><div>Joe Brown</div></div>