<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii">
<TITLE>Message</TITLE>
<META name=GENERATOR content="MSHTML 8.00.6001.23588"></HEAD>
<BODY style="FONT-FAMILY: Arial; COLOR: #000000; FONT-SIZE: 10pt" id=role_body
bottomMargin=7 leftMargin=7 rightMargin=7 topMargin=7>
<DIV><SPAN class=265130718-01102015>I believe Jim is asking how to get the
subassembly apart.</SPAN></DIV>
<DIV><SPAN class=265130718-01102015></SPAN> </DIV>
<DIV><SPAN class=265130718-01102015>I'm looking at Section K pg 15. I
don't have this part in front of me so this is a bit difficult.</SPAN></DIV>
<DIV><SPAN class=265130718-01102015></SPAN> </DIV>
<DIV><SPAN class=265130718-01102015>1st check all the instructions on pgs 15
&16 and any with the rebuild kit.</SPAN></DIV>
<DIV><SPAN class=265130718-01102015></SPAN> </DIV>
<DIV><SPAN class=265130718-01102015>Part #4 has a key type opening - pull the
spring down and move part #8 into the key opening to release</SPAN></DIV>
<DIV><SPAN class=265130718-01102015></SPAN> </DIV>
<DIV><SPAN class=265130718-01102015>Part #4 has a spring clip part to it that
has to be pulled up to release from part #3</SPAN></DIV>
<DIV><SPAN class=265130718-01102015></SPAN> </DIV>
<DIV><SPAN class=265130718-01102015>I think that will do it but like I stated I
don't have this assembly in front of me so I can only hope it
helps.</SPAN></DIV>
<DIV><SPAN class=265130718-01102015></SPAN> </DIV>
<DIV><SPAN class=265130718-01102015>Don't loose any parts - keep everything
clean.</SPAN></DIV>
<DIV><SPAN class=265130718-01102015></SPAN> </DIV>
<DIV><SPAN class=265130718-01102015>Cylinder bore is polished like a mirror not
honed out rough.</SPAN></DIV>
<DIV><SPAN class=265130718-01102015></SPAN> </DIV>
<DIV><SPAN class=265130718-01102015>Ron Fraser</SPAN></DIV>
<DIV><SPAN class=265130718-01102015></SPAN> </DIV>
<BLOCKQUOTE style="MARGIN-RIGHT: 0px" dir=ltr>
<DIV></DIV>
<DIV dir=ltr lang=en-us class=OutlookMessageHeader align=left><FONT
face=Tahoma>-----Original Message-----<BR><B>From:</B> Tigers
[mailto:tigers-bounces@autox.team.net] <B>On Behalf Of </B>Rollright--- via
Tigers<BR><B>Sent:</B> Thursday, October 01, 2015 9:19 AM<BR><B>To:</B>
tigers@autox.team.net<BR><B>Subject:</B> [Tigers] Tiger brake master rebuild
question<BR><BR></FONT></DIV><FONT id=role_document face=Arial>
<DIV>
<DIV>Hello,</DIV>
<DIV> </DIV>
<DIV>I need to rebuild a Tiger brake master and replace the seals with the kit
from SS.</DIV>
<DIV> </DIV>
<DIV>Here is the question: the "piston and spring subassembly" is out of the
cast aluminum brake master body, and is sitting on the desk in front
of me. (Section K, Pg. 15 of shop manual has picture of this
subassembly)</DIV>
<DIV> </DIV>
<DIV>But I can't for the life of me figure out how to break this
subassembly down so I can put new seals in it.</DIV>
<DIV> </DIV>
<DIV>Someone must know.........
<DIV> </DIV>
<DIV><FONT lang=0 face=Arial PTSIZE="10" FAMILY="SANSSERIF">Jim
Armstrong<BR>382002083<BR>Mk 1A<BR>code 86<BR>TAC #
0763</FONT></DIV></DIV></DIV>
<DIV><FONT style="BACKGROUND-COLOR: transparent"
face=Arial><BR></FONT> </DIV></BLOCKQUOTE></FONT></BODY></HTML>