[Tigers] I hate this car!

[Stu]

Yes, that's my plan for tomorrow. It's hot as **** here today. It's
uncomfortable working in the garage,  so i quit early.  Tomorrow should be
somewhat cooler.

On Sat, Jul 4, 2026 at 12:36 PM Donald Antilla <fast427 at sbcglobal.net>
wrote:

> Might be easier to remove the points plate and work on it on your bench.
> It’s not difficult to remove the plate. Be sure not to cock it as you try
> to pull it out.
> From Don's iPhone
>
> On Jul 4, 2026, at 12:33 PM, Will Seay <wseay777 at gmail.com> wrote:
>
> 
> Stu,
> If you can get a Dremel tool in there you might be able to clean the slot
> up so that it's useable.  Use one of their cutoff disks.
>
> Will - wseay777 at gmail.com
> ______________________________
> "I think not therefore I am not" (anon)
>
>
> On Sat, Jul 4, 2026 at 10:09 AM Stu <sabre2tgr at gmail.com> wrote:
>
>> The little slotted screw that holds the condenser in the stock Tiger
>> distributor... The slot stripped and I can't get it out.  I've had
>> penetrating oil on it (PB) and still no luck. The plate was fairly oily
>> anyway, so no rust.  Anybody have any ideas, short of total disassembly?
>> _______________________________________________
>>
>> tigers at autox.team.net
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/tigers
>> http://autox.team.net/archive
>>
>> Unsubscribe:
>> http://autox.team.net/mailman/options/tigers/wseay777@gmail.com
>>
>>
>> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
> http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/fast427@sbcglobal.net
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20260704/64b43416/attachment.htm>