[Tigers] waist roll clip

[Ron Fraser]

I did not get a reply for this one so I dug deeper.

 

The metal clip for the waist roll has 2 rivets holding it to the cardboard
in the waist roll.

Clip is 42mm x 12mm

I have not found a part number listing for this clip possibly because it is
part of an assembly.

 

I believe new waist rolls have no clips so you would need Velcro or glue to
attach it to the panel or is there another option.

 

Ron Fraser

 

 

 

From: Tigers <tigers-bounces at autox.team.net> On Behalf Of Ron Fraser
Sent: Wednesday, September 25, 2024 2:36 PM
To: tigers at Autox.Team.Net
Subject: [Tigers] waist roll clip

 

Anyone have a picture and part number for the clip used to hold the rear
seat waist roll?

 

Ron Fraser

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20240929/d656dad7/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 100_5605.jpg
Type: image/jpeg
Size: 346995 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20240929/d656dad7/attachment-0003.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 100_5655.jpg
Type: image/jpeg
Size: 402956 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20240929/d656dad7/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 100_5657.jpg
Type: image/jpeg
Size: 362407 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20240929/d656dad7/attachment-0005.jpg>