[Tigers] [Jensen-cars] Any hot rodders out there

Tue Nov 26 15:55:58 MST 2024

Chuck,
Have got a ss reducing elbow on its way it's a compression by compression. Have already tested to see if a compression fitting will work and it does. As soon as the fitting comes in I can finish that up.
In the mean time I installed the trinary switch and finished installing the air conditioning hoses. So now the ac hoses run from the firewall fittings to the compressor and to the drier and condenser.
Next, I'm going to install my accusump and oil cooler and run the oil lines. I have to install the remote oil filter holder also. Had to remove my air filter housing to make it easier to access everything. 

Sent from AT&T Yahoo Mail on Android 

  On Tue, Nov 26, 2024 at 9:10 AM, Chuck Huber<osmanbeyazpasha at gmail.com> wrote:   Can’t you just buy a reducing brass hose barb or elbow at Ace hardware?

Sent by me!

On Nov 24, 2024, at 8:41 PM, Daniel Eiland <deiland1 at att.net> wrote:

Paul,
Don't know if that will work but I'll try it.
Dan 

Sent from AT&T Yahoo Mail on Android 

  On Sun, Nov 24, 2024 at 5:41 PM, 'Paul Rollins' via Jensen Cars<jensen-cars at googlegroups.com> wrote:     Would a short section of 1/4" plastic tubing on the tank inlet allow the 3/8" hose to slip over it for a tight fit?       Paul  
  On 11/24/2024 3:38 PM PST Daniel Eiland <deiland1 at att.net> wrote:          I have an aluminum aftermarket radiator with an overflow nipple that's 3/8 inch. My aftermarket overflow tank has an inlet tube of 1/4 inch. I'm wondering if anyone has come across this issue before, and if so how did you resolve the issue. I tried a reducing 90 deg;ree ellbow on my tank but it just slides off. Any suggestions out there?      See attached photos:   _   Below is the same type overflow tank I'm using. The inlet line is 1/4 inch.         <sum-299990_xl.jpg>  

   The photo below shows my radiator with a 3/8 inch overflow nipple to the right of the filler cap.    <20241123_222209.jpg>  I was hoping I could mount a 90 degree elbow to the inlet on the bottom of my overflow tank, then route the overflow tube under the radiator, then up the right side of the radiator to the overflow nipple. Turns out the elbow I bought is made of rubber so it just slips loose from the fittings. Tried to clamp it down and it still slips loose.        Any suggestions on how I can get from 3/8 inch hose to 1/4 inch hose?       TIA,       Dan Eiland    

  Sent from AT&T Yahoo Mail on Android   

 -- 
You received this message because you are subscribed to the Google Groups "Jensen Cars" group. 
To unsubscribe from this group and stop receiving emails from it, send an email to jensen-cars+unsubscribe at googlegroups.com. 
To view this discussion visit https://groups.google.com/d/msgid/jensen-cars/1322231923.2407608.1732491503904%40mail.yahoo.com. 

-- 
You received this message because you are subscribed to the Google Groups "Jensen Cars" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jensen-cars+unsubscribe at googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/jensen-cars/892951008.416342.1732495254742%40connect.xfinity.com.

-- 
You received this message because you are subscribed to the Google Groups "Jensen Cars" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jensen-cars+unsubscribe at googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/jensen-cars/1099268895.2236472.1732498861241%40mail.yahoo.com.
<sum-299990_xl.jpg><20241123_222209.jpg>

-- 
You received this message because you are subscribed to the Google Groups "Jensen Cars" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jensen-cars+unsubscribe at googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/jensen-cars/E4B54961-8C27-4190-806D-214FBE111435%40gmail.com.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20241126/9ffba2cf/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20241126_153702.jpg
Type: image/jpeg
Size: 357310 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20241126/9ffba2cf/attachment-0009.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20241126_153609.jpg
Type: image/jpeg
Size: 646822 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20241126/9ffba2cf/attachment-0010.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20241126_154154.jpg
Type: image/jpeg
Size: 331556 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20241126/9ffba2cf/attachment-0011.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20241126_154041.jpg
Type: image/jpeg
Size: 499808 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20241126/9ffba2cf/attachment-0012.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20241126_153928.jpg
Type: image/jpeg
Size: 462373 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20241126/9ffba2cf/attachment-0013.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20241126_153822.jpg
Type: image/jpeg
Size: 392470 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20241126/9ffba2cf/attachment-0014.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20241126_154420.jpg
Type: image/jpeg
Size: 430419 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20241126/9ffba2cf/attachment-0015.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20241126_154309.jpg
Type: image/jpeg
Size: 518688 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20241126/9ffba2cf/attachment-0016.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20241126_154528.jpg
Type: image/jpeg
Size: 589500 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20241126/9ffba2cf/attachment-0017.jpg>