[Tigers] Any hot rodders out there

[D or G at sbc]

 This might work.
David Franchi
https://www.amazon.com/CellarBrew-Splicer-Stainless-Reducing-Fitting/dp/B07VB833KF?th=1
    On Sunday, November 24, 2024 at 03:44:58 PM PST, Daniel Eiland via Tigers <tigers at autox.team.net> wrote:  
 
 I have an aluminum aftermarket radiator with an overflow nipple that's 3/8 inch. My aftermarket overflow tank has an inlet tube of 1/4 inch. I'm wondering if anyone has come across this issue before, and if so how did you resolve the issue. I tried a reducing 90 deg;ree ellbow on my tank but it just slides off. Any suggestions out there?
See attached photos:_Below is the same type overflow tank I'm using. The inlet line is 1/4 inch. 



The photo below shows my radiator with a 3/8 inch overflow nipple to the right of the filler cap.
I was hoping I could mount a 90 degree elbow to the inlet on the bottom of my overflow tank, then route the overflow tube under the radiator, then up the right side of the radiator to the overflow nipple. Turns out the elbow I bought is made of rubber so it just slips loose from the fittings. Tried to clamp it down and it still slips loose. 
Any suggestions on how I can get from 3/8 inch hose to 1/4 inch hose?
TIA,
Dan Eiland 


Sent from AT&T Yahoo Mail on Android_______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/tigers/orr4sale@sbcglobal.net


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20241125/6ac97f20/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20241123_222209.jpg
Type: image/jpeg
Size: 419576 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20241125/6ac97f20/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: sum-299990_xl.jpg
Type: image/jpeg
Size: 102444 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20241125/6ac97f20/attachment-0003.jpg>