[Tigers] Rear End

[Jeffery Randall]

Also try Richmond gear directly.

On Sun, Apr 7, 2024 at 12:27 PM Jeffery Randall <jefferyrandall at gmail.com>
wrote:

> Try Speedway Motors.
>
> On Sun, Apr 7, 2024 at 9:53 AM Dr. T. Y. McDowell <tym2 at comcast.net>
> wrote:
>
>> Good Morning Tigers,
>>
>> I'm having an issue finding a ring and pinion for my Mk1A Tiger.
>> Years ago I had the original 2.88s replaced with a 3.73 posi unit.  The
>> 3.73 gears are just way too steep, so I want to go with a 3.08 (or
>> something close).
>>
>> I got a ring/pinion set from Summit (USA Standard Gear) but it's a 26
>> spline and I need a 10 spline.
>>
>> I called Summit yesterday and they said the only ring/pinion 10 spline
>> they had was a 4.56!
>>
>> Does anyone have any idea where I might get one a ten spline ring/pinion
>> that will fit?  I don't want to have to go to changing the yoke/driveshaft,
>> etc.
>>
>> Thanks in advance.
>>
>> Tym McDowell
>> _______________________________________________
>>
>> tigers at autox.team.net
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/tigers
>> http://autox.team.net/archive
>>
>> Unsubscribe:
>> http://autox.team.net/mailman/options/tigers/jefferyrandall@gmail.com
>>
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20240407/74ae54c3/attachment.htm>