[Tigers] Brake & Clutch pedals

[Tom Hall]

As most of you know I’ve been modifying Tiger/Alpine brake pedals for 
over 10 years to change the mechanical ratio from the OEM 4.4 to 1 to 6 
to 1.For all practical purposes, this eliminates the need for the 
problematic vacuum booster.As it turns out, this modification also works 
well on the clutch pedal making it much easier on your left leg and 
knee.This modification process requires me to weld a new pivot boss on 
the pedal above the OEM location.The precision needed to weld and 
machine this new boss on the pedal is reasonably critical and hard to do 
without the tooling I have developed.

I have interested clutch pedal customers with right hand drive Tigers in 
Australia, so I have a need to borrow (or buy) a right hand clutch pedal 
so that I will be able to create the tooling to reshape left hand pedals 
to work in the right hand location.If you have such a clutch pedal, I 
would like to borrow or buy this pedal so that I can address this need. 
I promise that I will not damage your pedal in my tooling 
development.Please advise if you can help.Tom

-- 
Tom Hall
ModTiger Engineering LLC
5712 San Luis Court
Pleasanton, CA 94566
(925)462-3876
modtiger at comcast.net
http://tigerengineering.net/  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20230729/a7f38b1c/attachment.htm>