[Tigers] Interior Trim

Ron Fraser rfraser at bluefrog.com
Thu Feb 2 10:22:35 MST 2023


Here is the Alpine Parts List diagram – Body Fittings – Plate C – Section YX – part # 171 & 172 below

2220818 & 2220819 – I don’t know if a drawing for this part is available – these are most likely the finished part numbers – the aluminum part might have a supplemental part number.

 

Attached is a scan, I believe is the part

Soft aluminum - .036” thick

Black covering is about .019” thick

I see 4 additional smaller holes in the aluminum – my guess is they align the part in the manufacturing process

Ron Fraser

 

 



 

From: Tigers <tigers-bounces at autox.team.net> On Behalf Of GARY WINBLAD
Sent: Thursday, February 02, 2023 11:06 AM
To: Jay Laifman <jay.laifman at gmail.com>; Joel Martin <jmartiniii at yahoo.com>; Tiger's Den <tigers at autox.team.net>
Subject: Re: [Tigers] Interior Trim

 

Yeah Joel only sent it to you Jay... 

Those aluminum pieces are really odd shaped.  They extend up to the cardboard piece across 

the top under the lip.  Finding some off an old Alpine is best. 

Cover with smooth black vinyl from a fabric store is what I would do, the pebble would be too 

extreme. 

I think the aluminum stops short of the basketweave but the vinyl wraps around under it. 

As you can guess, the aluminum is shaped in 3 dimensions, it is made from flat sheet but you 

need to bend it smoothly and trickily(!). 

Gary 

 

On 02/02/2023 10:23 AM Jay Laifman <jay.laifman at gmail.com <mailto:jay.laifman at gmail.com> > wrote: 

 

 

I think I'm the only one who got this.  Are you going for 100 pt concours?  If so, get more pictures and input on original over the years.  If not, just about anything you do will be nicer.  And why not?    

 

On Thu, Feb 2, 2023 at 6:31 AM Joel Martin <jmartiniii at yahoo.com <mailto:jmartiniii at yahoo.com> > wrote: 

 

Thanks to Jay and Gary for responding. 

 

So I am thinking thin aluminum cut piece, any one have dimensions, then cover with pebble fabric that I have left over from doing the interior and held on with 2 unpainted rivets in existing holes. 

 

Or is the pebble fabric over kill and buy some cheap thin vinyl to cover the thin aluminum cut piece? 

 

This would put the basketweave clip under or over the thin covered alum piece with cheap thin vinyl? 

 

Joel 

 

On Wednesday, February 1, 2023 at 10:51:51 PM EST, Jay Laifman < <mailto:jay.laifman at gmail.com> jay.laifman at gmail.com> wrote: 

 

 

Gary's the only one who responded.  And just in case you thought you needed more, I agree with Gary 100% - every detail.  Cheap thin vinyl over cheap thin aluminum with unpainted rivets. 

 

On Wed, Feb 1, 2023 at 5:31 PM Gary < <mailto:garywinblad at comcast.net> garywinblad at comcast.net> wrote: 

And basketweave  clip on edge stuff. 

Gary 

Sent from my iPhone 





On Feb 1, 2023, at 2:49 PM, Joel Martin via Tigers < <mailto:tigers at autox.team.net> tigers at autox.team.net> wrote: 

I was cleaning out the interior the other day and noticed I seem to missing 2 interior side coverings just under the end of the dash pad on both driver and passenger sides.  What is suppose to go here? 

 

<1675289072506blob.jpg> 

<1675289119452blob.jpg> 

 

Pebble black with or without card board backing and what type of screws with surrounds like in trunk? 

 

Thanks 

Joel Martin 

 

 

<1675289072506blob.jpg> 

<1675289119452blob.jpg> 

_______________________________________________ 

 <mailto:tigers at autox.team.net> tigers at autox.team.net 

Donate:  <http://www.team.net/donate.html> http://www.team.net/donate.html 
Archive:  <http://www.team.net/pipermail/tigers> http://www.team.net/pipermail/tigers  <http://autox.team.net/archive> http://autox.team.net/archive 

Unsubscribe:  <http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net> http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net 



_______________________________________________ 

 <mailto:tigers at autox.team.net> tigers at autox.team.net 

Donate:  <http://www.team.net/donate.html> http://www.team.net/donate.html 
Archive:  <http://www.team.net/pipermail/tigers> http://www.team.net/pipermail/tigers  <http://autox.team.net/archive> http://autox.team.net/archive 

Unsubscribe:  <http://autox.team.net/mailman/options/tigers/jay.laifman@gmail.com> http://autox.team.net/mailman/options/tigers/jay.laifman@gmail.com 



_______________________________________________ 

tigers at autox.team.net <mailto:tigers at autox.team.net>  

Donate: http://www.team.net/donate.html 
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive 

Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20230202/7f38301d/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 89686 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20230202/7f38301d/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: finisher.jpg
Type: image/jpeg
Size: 358913 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20230202/7f38301d/attachment-0003.jpg>


More information about the Tigers mailing list