[Tigers] Rear axle end play shims

[Owain Lloyd]

Do you known anyone with a surface grinder?  I normally make shims I need
out of thicker ones on the surface grinder.

On Fri, 18 Aug 2023 at 22:56, Derrick Schmidt via Tigers <
tigers at autox.team.net> wrote:

> Having a Truetrac installed and everything is ready for reassembly.
>
> The gentleman doing the work needs a 0.003" and a 0.005" shim.
>
> Tom Hall has some 0.005s and will be sending that one.
>
> Bill Martin has some shims but, as he is presently madly preparing two
> Tigers for shows in Monterey, is not sure when he will have time to check.
>
> Any other sources out there?  Would be more than happy to end up with
> extra at this point.  Leaving town in about a week & a half and would like
> to pick up the rear end before I leave.
>
> If not ... oh well.
>
> Thanks, in advance, for any leads.
>
> Derrick
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
> http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/owain.lloyd@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20230819/e4bab96b/attachment.htm>