[Tigers] Seat Cardboard

[Jay Laifman]

I made them myself.  As you said, I found either too thin or too thick.  I
went with too thick and tried all sorts of ways to curve it - heat, steam,
grooves.  I did ok.  But it was not perfect.  I guess though now looking at
them 20 years later, they look ok!  (This is on my Alpine.  The Tiger is
still original).

On Tue, Apr 4, 2023 at 6:02 PM Stu <sabre2tgr at gmail.com> wrote:

> Are your original cardboard pieces really in bad shape?  I just did my
> seatback this weekend, and mine were good enough to reuse.  They had pulled
> off the rivets, but a little duct tape held them in place during
> reassembly.  Now to get the seat bottom upholstery to stretch enough...
>
>
>
> On Tue, Apr 4, 2023 at 8:19 PM Jim D'Amelio via Tigers <
> tigers at autox.team.net> wrote:
>
>> What do you guys recommend to replace the cardboard on the seat backs.
>> I've done some searching,  but having trouble finding the correct thickness.
>>
>> Jim D
>>
>>
>>
>> Sent from my Galaxy
>>
>> _______________________________________________
>>
>> tigers at autox.team.net
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/tigers
>> http://autox.team.net/archive
>>
>> Unsubscribe:
>> http://autox.team.net/mailman/options/tigers/sabre2tgr@gmail.com
>>
>>
>> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
> http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/jay.laifman@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20230404/f917e7e9/attachment.htm>