[Tigers] panhard rod parts

[Ron Fraser]

Here is a picture of the spigot end.

My concern is the amount of weld holding the washer.

Is that correct or has a previous owner cobbled upon it?

 

Ron Fraser

 

From: Larry Mayfield <drmayf at mayfco.com> 
Sent: Monday, October 10, 2022 9:59 AM
To: 'Ron Fraser' <rfraser at bluefrog.com>
Subject: RE: [Tigers] panhard rod parts

 

Ron, send us a photo of what you think might be cobbled up? That end is
where the side to side location of the rear end is done.  

 

Mayf

Twfs. period

 

 

From: Tigers <tigers-bounces at autox.team.net
<mailto:tigers-bounces at autox.team.net> > On Behalf Of Ron Fraser
Sent: Sunday, October 9, 2022 2:16 PM
To: tigers at Autox.Team.Net <mailto:tigers at Autox.Team.Net> 
Subject: [Tigers] panhard rod parts

 



 

Anyone working on their Panhard rod?

I'm looking for a picture of an original part #46 called the spigot end.

I want to make sure a previous own did not cobble up this part.

 

Thanks 

Ron Fraser

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20221010/3551406a/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 9195 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20221010/3551406a/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 100_5283.jpg
Type: image/jpeg
Size: 450427 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20221010/3551406a/attachment-0003.jpg>