[Tigers] Big Hammer in Production

[GARY WINBLAD]

Well, I am not a TAC guy but starting in 1971...

My vote is for the hammer used at the "frame rail"  where Tiger exhaust
manifold clearance was needed.  In 1971, I discovered this area in my new
to me, 6 year old Tiger... my mind went into overtime contemplating the 
major front end wreck...  actually I started looking around when I
discovered the steering geometry was all messed up...
IF I wasn't an engineer, it would have save me a lot of grief...
Gary W

> On 05/15/2022 3:48 PM DW via Tigers <tigers at autox.team.net> wrote:
> 
>  
> If you KNOW the mods done during Tiger production, You know they DID use 
> a BIG hammer.
> 
> BUT, it has little to do with the Firewall.
> 
> Study the WORD Bulkhead...
> 
> DW
> 
> _______________________________________________
> 
> tigers at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
> 
> Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net