[Tigers] Filling Gas with Today's Nozzles

[Gary]

I do it right side up.  Put it all the way in but
pull the boot up slightly on one side.  Pull the
trigger just a little.  Takes forever, I come out
with cramps and dents but I hardly spill a
drop.
Gary


Sent from my iPhone

> On Jul 1, 2022, at 9:57 PM, Douglas Lyle via Tigers <tigers at autox.team.net> wrote:
> 
> 
> I have the best luck with it upside down.  
> 
> On Friday, July 1, 2022 at 09:21:24 PM PDT, Jay via Tigers <tigers at autox.team.net> wrote:
> 
> 
> Anyone else have difficulty?  It seems sometimes I can make it fill fine.  Other times, no matter what position I put it in, it either immediately clicks and shuts off, or it fills and overflows right out even though I just started filling.
> 
> I can’t seem to figure out what angle is best.  Sometimes I have to hold high, sometimes low, sometimes I need to lift the rubber boot up just a fraction.  Anyone have it figured out?
> _______________________________________________
> 
> tigers at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
> 
> Unsubscribe: http://autox.team.net/mailman/options/tigers/douglasalyle@yahoo.com
> 
> 
> _______________________________________________
> 
> tigers at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
> 
> Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20220701/cc5c878d/attachment.htm>