[Tigers] rear axle hub puller

[Ron Fraser]

Clyde

                As I see it, conversations like this one are never closed.   New information and ideas are always welcome.

 

I would ask for some dimensions of your puller tool.

 

Steel plate looks like it is ½” thick?

Size of the jack screw?

 

The tools shown in the Shop Manual look beefy so any tool someone makes needs to also be beefy.

 

Ron Fraser

 

From: Tigers <tigers-bounces at autox.team.net> On Behalf Of clyde mclaughlin via Tigers
Sent: Thursday, February 17, 2022 6:31 PM
To: tigers at autox.team.net
Subject: [Tigers] rear axle hub puller

 

I know the conversation about rear axle hub pullers was pretty well exhausted a couple weeks ago, I have recently moved and finally got this unpacked so I thought I would forward along a pix of the puller I made and it works perfectly, it has probably taken off a half dozen or so, the key is a strong plate with NO FLEX and the large jack screw, set this up put a really good strain on the jack screw and then smack it with a good hammer and BANG it pops off.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20220218/fdffa537/attachment.htm>