[Tigers] Replacing rear axle bearings

[Mark Rense]

Are you a TE/AE member? The factory workshop manual is on the site in PDF
format. You’ll need a hefty puller to get out the axels. I used a race shop
that did off-road trucks as my go-to source. It’s a Dana 44 with a slightly
different ring carrier  so not much rocket science.

Bugz
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20220204/66b3859b/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 389AECA2-9FF9-4A33-B2A7-40EB649CDDB1.jpeg
Type: image/jpeg
Size: 471701 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20220204/66b3859b/attachment-0001.jpeg>