[Tigers] Headers

[Clyde Mclaughlin]

Looking for a header that doesn't have the cyl #3 and#7 hanging lower than
the other 3 on each side..I viewed a set while performing a TAC inspection,
but the owner didn't know their origin because they were on the car when he
acquired it. I have included 2 pix..note from the pix that the two lower
tubes are parallel, and I would believe less likely to bottom out over
obsticles, and they look better, but I'm looking for ground clearance.
Thanks for any input, Clyde
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20221204/ac909fec/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20211016_084945.jpg
Type: image/jpeg
Size: 2798185 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20221204/ac909fec/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20211016_084955.jpg
Type: image/jpeg
Size: 2871122 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20221204/ac909fec/attachment-0003.jpg>