[Tigers] False floor holes

[Jim D'Amelio]

Ron,I looked underneath and only saw one hole and that was too far back.  Think it was for a carpet stud.  I put it in place and have an idea of its position.  Pulled back some of the heat barrier I had down and can't find anything.  They are the original floors.  Only lower sheet metal that didn't need replacing.  Guess I'll need to drill new holes.Sent from my Galaxy
-------- Original message --------From: Ron Fraser <rfraser at bluefrog.com> Date: 8/13/22  7:15 PM  (GMT-05:00) To: 'Jim D'Amelio' <jimdamelio at verizon.net>, tigers at Autox.Team.Net Subject: RE: [Tigers] False floor holes Jim  Any chance you can see the holes from underneath or on the firewall? I have not looked so not sure. You should be able to set the foot rest in place and get an idea of locations. Ron Fraser From: Tigers <tigers-bounces at autox.team.net> On Behalf Of Jim D'Amelio via TigersSent: Saturday, August 13, 2022 1:31 PMTo: tigers at autox.team.netSubject: [Tigers] False floor holes I'm not able to locate the six holes in the floorboard for the foot rest. Must be covered over with POR.  Anyone have bare floorboards to take pictures and dimensions.  Thanks Jim D   Sent from my Galaxy 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20220813/7b0ca128/attachment.htm>