[Tigers] Tiger Rear Sway bar

Joe Brown jbbrown1980 at gmail.com
Thu Sep 30 09:54:51 MDT 2021


I would also like pictures or drawings.

Thanks,
Joe Brown

On Thu, Sep 30, 2021 at 9:50 AM steve wick via Tigers <tigers at autox.team.net>
wrote:

> On a slightly different note, my Tiger is missing the panhard bar and
> mounting bracket. I've looked off and on for several years and never found
> one. I know I can get a reinforced bracket that welds in, but don't run my
> car hard and prefer "factory". If anyone has a bar and bracket laying
> around and wants to sell, or if I could get pictures and measurements of
> both so I could replicate them, please email me off list. I have a Mk1 with
> the bracket on the right side. Thanks guys.
>
> Steve
>
> ------------------------------
> *From:* Tigers <tigers-bounces at autox.team.net> on behalf of Taylor,
> Matthew via Tigers <tigers at autox.team.net>
> *Sent:* Thursday, September 30, 2021 7:07 AM
> *To:* Michael Wood <mwood24020 at aol.com>; tigers at autox.team.net <
> tigers at autox.team.net>
> *Subject:* Re: [Tigers] Tiger Rear Sway bar
>
>
> I don’t know about “total grip capability,” but you have seen my dad drive
> his Tiger with the rear sway bar and it works great.  I’ve driven and
> autocrossed Tigers that are set up properly with or without the rear sway
> bar and they both handle great but different.  A good driver can adjust to
> the differences and take advantages of the differences, but I doubt one is
> much faster than the other.  It’s possible that one could be faster than
> the other depending on the type of course, but it would be fractions of a
> second based on my autocross experiences.
>
>
>
> Matthew
>
>
>
> *From:* Tigers <tigers-bounces at autox.team.net> *On Behalf Of *Michael
> Wood via Tigers
> *Sent:* Wednesday, September 29, 2021 6:28 PM
> *To:* tigers at autox.team.net
> *Subject:* Re: [Tigers] Tiger Rear Sway bar
>
>
>
> Like said, any rear bar on a Tiger is an aftermarket solution...and I've
> yet to see one (not counting custom fabricated with heim joints, correct
> angles, adjustability etc used in conjunction with front end improvements)
> that made any sense or was additive to total grip capability.
>
>
>
> Mike
>
>
> -----Original Message-----
> From: Joel Martin via Tigers <tigers at autox.team.net>
> To: Tiger List Serve <tigers at autox.team.net>
> Sent: Wed, Sep 29, 2021 1:54 pm
> Subject: [Tigers] Tiger Rear Sway bar
>
> Was a rear sway bar originally fitted on the Tiger or was it a LAT option
> or not?  Size, mounting points? Either way could someone post some pictures
> of how they were suppose to be mounted and installed?
>
>
>
> Thanks
>
>
>
> Joel Martin
>
>
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
> http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/jbbrown1980@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20210930/523c596c/attachment-0001.htm>


More information about the Tigers mailing list