[Tigers] exhaust headers

[Allan Ballard]

Are you going to install a balance (crossover) pipe?

-Allan Ballard
Mk1a Tiger
Series I (v6) Alpine

Sent from my iPhone

> On Oct 20, 2021, at 4:13 PM, clyde mclaughlin via Tigers <tigers at autox.team.net> wrote:
> 
> does anyone recognize this header set,  it appears that the two bottom tubes are same distance from the ground and I noticed that the collector lined up with the opening in the cross member unlike the CAT headers.  Also the CAT headers seem to have the #3 and #7 cyl tubes hang lower than they need to thus hit the ground regularly.  Suggestions, comments, recommendations.  I took this pix on a car at the NH TAC session this past week, the owner didn't know because they were on the car when he got it.
> <20211016_084945.jpg>
> _______________________________________________
> 
> tigers at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
> 
> Unsubscribe: http://autox.team.net/mailman/options/tigers/aballard@ix.netcom.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20211020/b4189b3b/attachment.htm>