[Tigers] Tigers Digest, Vol 14, Issue 265

[Derek Daily]

As just another "data" point. B382000428
I definitely have a bronze elbow around.  Dad was orig owner.  Motor no longer original, BUT he moved most parts over and was very tight (ahem, cheap ass) about spending, so I'm quite confident unless there was a tech reason to do so, all the parts would have stayed.  (I have orig block).
Derek Dailydtdaily at yahoo.com 


From: D or G at sbc <orr4sale at sbcglobal.net> 
Sent: Friday, October 08, 2021 2:33 PM
To: 'Allan Ballard' <aballard at ix.netcom.com>; 'jimdamelio' <jimdamelio at verizon.net>; Ron Fraser <rfraser at bluefrog.com>
Cc: 'Tiger List List' <tigers at autox.team.net>
Subject: Re: [Tigers] Tiger PCV Adapter
     
 
     
I was buying and selling Tiger parts in 1978 and this brass angle fitting was obsolete from Ford then. 
   
I believe the brass angle fitting was made by Weatherhead.
   
 
   
I am 90% sure that all the 260 MKI Tigers had the angle fitting PCV adapter, and it was changed with the 289 MKII Tiger.
   
 
   
As I side note: The MKI & MKII Tigers used AC Delco PCV valves, not Ford/Motorcraft.
   
 
  
David Franchi
   
 
    



  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20211008/249325d4/attachment.htm>