[Tigers] 90 degree oil filter adaptor

Mon Jul 5 20:03:38 MDT 2021

Thanks Kirk.
That seems to be the wrong instructions 
and I can’t see inside the boxes though.
Any photos of the filter on the car?
Gary

Sent from my iPhone

> On Jul 5, 2021, at 4:40 PM, twotigers at verizon.net wrote:
> 
> 
> I did the Ford Motorsport 90 degree adapter 30 years ago- part numbers may have changed, and I remember having to buy at least the block adapter bolt, but here are some pics of the packages and part numbers, as well as the instructions. Kirk
>  
> From: Tigers <tigers-bounces at autox.team.net> On Behalf Of Ron Fraser
> Sent: Monday, July 5, 2021 1:23 PM
> To: 'Terry Lawell' <tlawell at austin.rr.com>; 'Gary' <garywinblad at comcast.net>
> Cc: 'Tiger Net' <Tigers at autox.team.net>
> Subject: Re: [Tigers] 90 degree oil filter adaptor
>  
> 90 degree adapter           FMS-M-6880-B50
>  
> FMS - That is the Ford Motorsport part number
>  
> Just guessing but there is probably a Ford logo on the part.
>  
> Ron Fraser
>  
> From: Tigers <tigers-bounces at autox.team.net> On Behalf Of Terry Lawell
> Sent: Sunday, July 04, 2021 9:57 PM
> To: Gary <garywinblad at comcast.net>
> Cc: Tiger Net <Tigers at autox.team.net>
> Subject: Re: [Tigers] 90 degree oil filter adaptor
>  
> Gary,
> 
>  The summit part numbers for the 90 degree oil filter adapter and the adapter to the block are listed below. I have also included a NAPA oil filter number that fits the adapter:
> 
> 90 degree adapter           FMS-M-6880-B50
> 
> engine block adapter       Dart 32940000
> 
> NAPA spin-on oil filter    27502
> 
> I hope this helps.
> 
> Cheers, Terry
> 
>  
> 
>  
> 
>  
> On 7/3/21, 4:27 PM, Gary wrote:
> When you get this all figured out, how about
> taking some pictures and giving us the
> Summit part numbers.  It’s way past the time 
> that I should have replaced the rubber hose 
> in my remote setup.
> Gary
>  
> 
> Sent from my iPhone
>  
> 
> On Jul 3, 2021, at 12:50 PM, Stu via Tigers <tigers at autox.team.net> wrote:
> 
> 
> Yes, Fram ph3600 or Ford FL400 will fit without grinding the engine mount.
>  
> On Sat, Jul 3, 2021, 3:41 PM Terry Lawell <tlawell at austin.rr.com> wrote:
> Hi Ron,
> 
>   It turns out Summit had the right adapter for the kit, the sales 
> person just didn't know it. They have sent the adapter to me and it fits 
> correctly in the block as well as in the kit. The only problem was the 
> oil filter they sent me was incorrect - it hits up against the oil pan. 
> Is it the ph3600 that is slimmer and fits that kit?
>   I also found another problem - the oil line from the oil pressure 
> gauge was cracked and leaking. when I disconnected the oil line fitting, 
> I also took off the fitting that goes into the block. It was very 
> difficult to get off and I am concerned that someone either put a 
> fitting in there with the wrong threads or stripped the threads when 
> they installed it. Do you know what size those threads are? It appears 
> to be a british standard pipe thread. I had to use whitworth wrenches to 
> get both the pressure fitting nut and the fitting to the block off. Any 
> info on these fittings would be much appreciated.
> 
> Cheers, Terry
> 
> 
> On 7/3/21, 7:45 AM, Ron Fraser wrote:
> > Terry
> >       1st -  I would contact Summit to make sure that oil filter kit did
> > not come with an adaptor or if it is missing from your kit.
> > 2nd -  does Summit have the adaptor needed for this kit?
> >
> > C20Z 6890-C seems to be the Ford part number for the adaptor - 3/4 x16
> > thread and 1 1/16 x 12 thread
> > You need to check that this is correct for your oil filter kit.
> >
> > https://www.npdlink.com/search/products?search_terms=fitting%2Boil%2Bfilter&
> > top_parent=200001&year=
> >
> > see if 6890-A is the part you need.
> >
> > Ron Fraser
> >
> > -----Original Message-----
> > From: Tigers <tigers-bounces at autox.team.net> On Behalf Of Terry Lawell via
> > Tigers
> > Sent: Thursday, July 01, 2021 8:34 PM
> > To: tigers at autox.team.net
> > Subject: [Tigers] 90 degree oil filter adaptor
> >
> > I purchased a 90 degree oil filter adapter from Summit Racing and when it
> > arrived I realized it did not have the adapter for the block, though the
> > salesman told me it came with it. Does anyone know where I can get the
> > adapter? I think it is 1.16" threads to the block and 13/16" threads to the
> > adapter.
> >
> > Cheers, Terry
> > _______________________________________________
> >
> > tigers at autox.team.net
> >
> > Donate: http://www.team.net/donate.html
> > Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
> >
> > Unsubscribe:
> > http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com
> >
> >
> >
> 
> _______________________________________________
> 
> tigers at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
> 
> Unsubscribe: http://autox.team.net/mailman/options/tigers/sabre2tgr@gmail.com
> 
> _______________________________________________
> 
> tigers at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
> 
> Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
> 
>  
> <IMG_5144.JPG>
> <IMG_5145.JPG>
> <IMG_5146.JPG>
> <IMG_5147.JPG>
> <IMG_5148.JPG>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20210705/f1067d11/attachment.htm>