[Tigers] 90 degree oil filter adaptor

[Ron Fraser]

90 degree adapter           FMS-M-6880-B50

 

FMS - That is the Ford Motorsport part number

 

Just guessing but there is probably a Ford logo on the part.

 

Ron Fraser

 

From: Tigers <tigers-bounces at autox.team.net> On Behalf Of Terry Lawell
Sent: Sunday, July 04, 2021 9:57 PM
To: Gary <garywinblad at comcast.net>
Cc: Tiger Net <Tigers at autox.team.net>
Subject: Re: [Tigers] 90 degree oil filter adaptor

 

Gary,

 The summit part numbers for the 90 degree oil filter adapter and the adapter to the block are listed below. I have also included a NAPA oil filter number that fits the adapter:

90 degree adapter           FMS-M-6880-B50

engine block adapter       Dart 32940000

NAPA spin-on oil filter    27502

I hope this helps.

Cheers, Terry

  




 


 

On 7/3/21, 4:27 PM, Gary wrote:

When you get this all figured out, how about 

taking some pictures and giving us the

Summit part numbers.  It’s way past the time 

that I should have replaced the rubber hose 

in my remote setup.

Gary

 

Sent from my iPhone





On Jul 3, 2021, at 12:50 PM, Stu via Tigers  <mailto:tigers at autox.team.net> <tigers at autox.team.net> wrote:

 

Yes, Fram ph3600 or Ford FL400 will fit without grinding the engine mount.

 

On Sat, Jul 3, 2021, 3:41 PM Terry Lawell <tlawell at austin.rr.com <mailto:tlawell at austin.rr.com> > wrote:

Hi Ron,

  It turns out Summit had the right adapter for the kit, the sales 
person just didn't know it. They have sent the adapter to me and it fits 
correctly in the block as well as in the kit. The only problem was the 
oil filter they sent me was incorrect - it hits up against the oil pan. 
Is it the ph3600 that is slimmer and fits that kit?
  I also found another problem - the oil line from the oil pressure 
gauge was cracked and leaking. when I disconnected the oil line fitting, 
I also took off the fitting that goes into the block. It was very 
difficult to get off and I am concerned that someone either put a 
fitting in there with the wrong threads or stripped the threads when 
they installed it. Do you know what size those threads are? It appears 
to be a british standard pipe thread. I had to use whitworth wrenches to 
get both the pressure fitting nut and the fitting to the block off. Any 
info on these fittings would be much appreciated.

Cheers, Terry


On 7/3/21, 7:45 AM, Ron Fraser wrote:
> Terry
>       1st -  I would contact Summit to make sure that oil filter kit did
> not come with an adaptor or if it is missing from your kit.
> 2nd -  does Summit have the adaptor needed for this kit?
>
> C20Z 6890-C seems to be the Ford part number for the adaptor - 3/4 x16
> thread and 1 1/16 x 12 thread
> You need to check that this is correct for your oil filter kit.
>
> https://www.npdlink.com/search/products?search_terms=fitting%2Boil%2Bfilter <https://www.npdlink.com/search/products?search_terms=fitting%2Boil%2Bfilter&> &
> top_parent=200001&year=
>
> see if 6890-A is the part you need.
>
> Ron Fraser
>
> -----Original Message-----
> From: Tigers <tigers-bounces at autox.team.net <mailto:tigers-bounces at autox.team.net> > On Behalf Of Terry Lawell via
> Tigers
> Sent: Thursday, July 01, 2021 8:34 PM
> To: tigers at autox.team.net <mailto:tigers at autox.team.net> 
> Subject: [Tigers] 90 degree oil filter adaptor
>
> I purchased a 90 degree oil filter adapter from Summit Racing and when it
> arrived I realized it did not have the adapter for the block, though the
> salesman told me it came with it. Does anyone know where I can get the
> adapter? I think it is 1.16" threads to the block and 13/16" threads to the
> adapter.
>
> Cheers, Terry
> _______________________________________________
>
> tigers at autox.team.net <mailto:tigers at autox.team.net> 
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com
>
>
>

_______________________________________________

tigers at autox.team.net <mailto:tigers at autox.team.net> 

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/tigers/sabre2tgr@gmail.com



_______________________________________________

tigers at autox.team.net <mailto:tigers at autox.team.net> 

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net



 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20210705/a3d72917/attachment.htm>