[Tigers] Trunk jack clips

[Ron Fraser]

Interesting!!

According to this picture I have small and medium clips, I don’t have a large clip.

I will have to check my tool clips more closely.

 

Thanks for the info and photo

 

Ron Fraser

 

From: James Armstrong <rollright at aol.com> 
Sent: Friday, December 17, 2021 3:03 PM
To: rfraser at bluefrog.com; tigers at autox.team.net
Subject: Re: Trunk jack clips

 

Hello,

 

Ron asked me to make some measurements of the three clips:

 

Small - 1 1/4" high,  7/8" wide at base                    3 used on wheel brace (tire iron)

Medium- 2"    high,   1 1/8" wide at base                2 used on lifting jack

Large       1 13/16" high, 1 9/16" wide at base        1 used on lifting jack on square section

 

Attached is a picture of all three clips.

 

Thanks all,

 

Jim Armstrong

Mk 1A


In a message dated 12/17/2021 12:29:02 PM Eastern Standard Time, rfraser at bluefrog.com <mailto:rfraser at bluefrog.com>  writes: 

 

Gary
    I believe there are multiple answers to this question just like
there are several ways the Jack and Brace are placed.
I only have the small clips on the Brace and 3 large clips on the Jack but I
don't know that is absolutely correct.
I have seen pictures that look like there is a medium clip on the big end of
the Brace with 2 small clips on the handle.

The size of these clips and placement could be almost as random as Tiger
engine # install.

The Parts Lists does not list these clips as far as I know.

Ron Fraser

-----Original Message-----
From: Tigers <tigers-bounces at autox.team.net <mailto:tigers-bounces at autox.team.net> > On Behalf Of GARY WINBLAD
Sent: Friday, December 17, 2021 11:58 AM
To: JAMES ARMSTRONG <rollright at aol.com <mailto:rollright at aol.com> >; JAMES ARMSTRONG via Tigers
<tigers at autox.team.net <mailto:tigers at autox.team.net> >
Subject: Re: [Tigers] Tigers Digest, Vol 14, Issue 386. Trunk jack clips

> On 12/16/2021 2:20 PM JAMES ARMSTRONG via Tigers <tigers at autox.team.net <mailto:tigers at autox.team.net> >
wrote:
>and one large one. The large one is for the part of the lifting jack that
is inserted into the body channels of the car. 

Is that right?
I am pretty sure mine in B9470622 are original.  All 3 for the jack seem to
be the same.
A larger one for the smaller arm doesn't make sense...?
Gary 


_______________________________________________

tigers at autox.team.net <mailto:tigers at autox.team.net> 



Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers  <http://www.team.net/pipermail/tigers> http://autox.team.net/archive

Unsubscribe:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com 





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20211217/162b234c/attachment.htm>