[Tigers] Fwd: Tigers eng removal
GARY WINBLAD
garywinblad at comcast.net
Sun Dec 5 09:30:32 MST 2021
Remove radiator, headers, carb, etc.
Slide it forward out of x-frame, let tranny end down and drop it out. Push the button and raise Tiger off the top.
Gary
> On 12/05/2021 12:34 AM steve wick <srwick at hotmail.com> wrote:
>
>
> Well that would save a lot of time. I'll have to look at it closer when I get ready to put it on the lift. I was going to strip the interior and dash first while it's on the ground, and work out from there.
>
> Steve
>
>
>
> ---------------------------------------------
> From: GARY WINBLAD <garywinblad at comcast.net>
> Sent: Saturday, December 4, 2021 8:33 AM
> To: steve wick <srwick at hotmail.com>; steve wick via Tigers <tigers at autox.team.net>; Lance Beauchamp <blance598 at gmail.com>; jvparlanti at gmail.com <jvparlanti at gmail.com>
> Subject: Re: [Tigers] Fwd: Tigers eng removal
>
> If you use your 4-post lift, you don't have to remove the crossmember. That also keeps the wheels, steering, and brakes working for moving the body
> around for body and paint!
> Poor photo attached. I did use my engine hoist, floor jack and a low profile engine/tranny dolly I made.
> Gary
>
>
> > > On 12/04/2021 10:15 AM steve wick via Tigers <tigers at autox.team.net> wrote:
> >
> >
> > Thanks to all for all the advice on engine removal, compartment color and your experiences with updated drivetrains. I think I now know what I'm doing. 😁
> >
> > Steve
> >
> >
> >
> > >
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20211205/a60bb869/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0843.JPG
Type: image/jpeg
Size: 575405 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20211205/a60bb869/attachment-0001.jpe>
More information about the Tigers
mailing list