[Tigers] Engine Cradle or Storage Stand Recommendation

[Randall Antosiak]

Hi Tiger People - I wanted to share a positive experience I had with an engine cradle or storage stand.  I was planning on pulling my engine and needed a stand for it.  I prefer to buy rather than make if the price is right, and this stand from Speedway Motors is certainly cheap enough at $45.  I also bought the caster wheel kit for another $50.  I"m happy to say that it can hold both the engine and transmission.  It rolls smoothly and easily, and did not become unbalanced when I removed the transmission.  Another plus is that I did not have to remove the starter to pull the engine.  However, there isn't enough room for more than a few inches of the exhaust header pipes so these will have to be cut back if you cannot remove them.
Top pic is from the Speedway website, and the bottom pic is of my engine.- Randy Antosiak





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20210819/83dceeb0/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 1629348402386blob.jpg
Type: image/png
Size: 1480012 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20210819/83dceeb0/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 1629348504104blob.jpg
Type: image/png
Size: 485318 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20210819/83dceeb0/attachment-0003.png>