[Tigers] Bolt size for heater valve <-> pipe flange?

[R Flynn]

Cheers all
- Bolts definitely appear to be 10-32 UNF
- That said, those are a tight fit into the threads, might need to chase it
out with a tap to clear out the corrosion ...

On Sat, 10 Oct 2020 at 20:37, D or G at sbc <orr4sale at sbcglobal.net> wrote:

> It is 10/32 (10NF) by 5/8" long. On the "donut ring" get the thickest you
> can find (at least 1/8"), you might also want to put some silicon on it.
>
> David Franchi
>
> On Saturday, October 10, 2020, 12:16:14 PM PDT, R Flynn via Tigers <
> tigers at autox.team.net> wrote:
>
>
> Does anyone happen to know the bolt size for the 2 bolts that are used
> between the valve itself and the pipe flange (with the mounting bracket
> sandwiched in between, photo below)?
>
> The look like maybe 12-24, but I don’t have a tap or die to confirm that
> ...
>
> It appears as though the leak in mine is caused because the seal between
> these two has perished, but so has one of the bolts!  Going try replacing
> it with a small donut ring to see if that cures the issue.
>
> Cheers in advance,
>
> Rick
>
>
> --
> rick
> B9471206: http://www.tigersunited.com/car_show/flynn_r/default.asp
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
> http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/orr4sale@sbcglobal.net
>
>
>

-- 
rick
B9471206: http://www.tigersunited.com/car_show/flynn_r/default.asp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20201011/1f5bddfd/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0171.jpg
Type: image/jpeg
Size: 1718881 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20201011/1f5bddfd/attachment-0001.jpg>