[Tigers] seat metel side panels

[Jeffery Randall]

Hi Guys, I have had different results from different brands of "wrinkle or
crinkle" paints. depending on the weather, temp, or surface prep. Not to
mention using a hair dryer to speed up the process.
    Jeff

On Sat, Nov 28, 2020 at 5:20 PM Stu via Tigers <tigers at autox.team.net>
wrote:

> Here's a photo of my old end plate.  This was illuminated at a low angle
> to enhance the texture, then I increased the contrast in Lightroom.  This
> is a lot finer texture than other crinkle finishes I've seen
>
> Stu
>
> On Sat, Nov 28, 2020 at 1:16 PM James Armstrong via Tigers <
> tigers at autox.team.net> wrote:
>
>>
>> Hello
>>
>> Years ago, I sand-blasted and crackle-black painted all four of the seat
>> metal side panels.
>>
>> Now they need it again. Just checked TBON and there is no mention of
>> them. (did I miss it?)
>>
>> What is the correct paint finish for them please.
>>
>> Jim Armstrong
>> Mk 1A
>> 382002083 LRXFE
>> Code 86
>> TAC #....
>> _______________________________________________
>>
>> tigers at autox.team.net
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/tigers
>> http://autox.team.net/archive
>>
>> Unsubscribe:
>> http://autox.team.net/mailman/options/tigers/sabre2tgr@gmail.com
>>
>>
>> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
> http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/jefferyrandall@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20201128/8d530dca/attachment.htm>