[Tigers] Several items: door clips and door check rivet
James Armstrong
rollright at aol.com
Tue Jun 23 11:17:27 MDT 2020
In the end, I just don't know what Rick is selling here. Plus, I could get no information other than "they are toprevent the door clips from scratching the glass. BUT they don't fit.
Jim A
In a message dated 6/23/2020 10:35:57 AM Eastern Standard Time, jbbrown1980 at gmail.com writes:
I bought the plastic sleeves but I gave up on them.
On Tue, Jun 23, 2020, 9:24 AM James Armstrong via Tigers <tigers at autox.team.net> wrote:
Hello,
1) In the Sunbeam Specialties catalog, page 20, there is a plastic sleeve numbered DP57S that is supposed to be used in conjunction with the door panel holding clips.They neither seem to fit over the holding clip nor do they seat in the receiving hole. No help from SS on this one.
2) There is a rivet or bolt that holds the door-strap to the frame as a stop. This is not called out in the big Alpine parts list.nor does Rick carry them. What is this supposed to be. Some Brit sells a rivet kit with washers and cotter pins on e-bay but is it correct? What is the correct part and what is its length and diameter?
Best regards to all,
Jim ArmstrongMk 1A382002083 LRXFECode 86TAC #...._______________________________________________
tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/jbbrown1980@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20200623/a60ed30a/attachment-0001.htm>
More information about the Tigers
mailing list