[Tigers] Tigers Digest, Vol 13, Issue 188

Mon Aug 24 16:49:44 MDT 2020

Ditto's on the wanting something better than zip ties. 
I have seen a similar to the sardine clamp for the vacuum booster on Moss motors. It's close but no cigar. The stainless steel ones would look almost too nice. 
On Monday, August 24, 2020 tigers-request <tigers at autox.team.net> wrote:
Send Tigers mailing list submissions to
    tigers at autox.team.net

To subscribe or unsubscribe via the World Wide Web, visit
    http://autox.team.net/mailman/listinfo/tigers
or, via email, send a message with subject or body 'help' to
    tigers-request at autox.team.net

You can reach the person managing the list at
    tigers-owner at autox.team.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Tigers digest..."

Today's Topics:

  1. Re: Steering rack (Jay)
  2. Re: Steering rack (steve wick)

----------------------------------------------------------------------

Message: 1
Date: Mon, 24 Aug 2020 14:34:00 -0700
From: Jay <jay.laifman at gmail.com>
To: Tom Witt <atwittsend at verizon.net>
Cc: Tigers <tigers at autox.team.net>
Subject: Re: [Tigers] Steering rack
Message-ID: <0A9CFE40-AE38-481E-9F18-15C80B2B4CFF at gmail.com>
Content-Type: text/plain; charset="utf-8"

Here are some options from McMaster Carr.  The first one is one of those squeeze bars types.  The other is 5/16? wide, which seems to be their most narrow.

I know I?ve seen more narrow somewhere.

https://www.mcmaster.com/hose-clamps/constant-tension-spring-clamps-for-firm-hose-and-tube/

https://www.mcmaster.com/hose-clamps/clamp-type~worm-drive/band-width~5-16/

On Aug 24, 2020, at 2:21 PM, Tom Witt via Tigers <tigers at autox.team.net> wrote:

Wanting something better than plastic zip ties to secure the boots I ventures to the world of hose clamps. You are correct most are too wide. I scoured through Pick Your Part and found certain BMW clamps (left in image) from the 80's/90's to not only be narrow enough, but also have a slight bevel on the edge. That said it was still a search to find the clamp in an appropriate diameter. I used these on my Tiger rack. I'd assume the midget rack boots are similar. Sorry I can't tell you the year/model and location the clamps were used but hopefully it helps with your search. Photo for comparison.

<ichnfkdfppofgpgj.png>

On 8/24/2020 6:42 AM, coolvt--- via Tigers wrote:
> 
> I have the MG Midget steering rack conversion.?? I need rubber boots.?? Does it take the same as a standard Tiger??? Also, what are good clamps that will work to secure??? Radiator clamps seem a little too wide and tend to cut into the boot.?? ??Thanks, Mark L
> 
> 
> _______________________________________________
> 
> tigers at autox.team.net <mailto:tigers at autox.team.net>
> 
> Donate: http://www.team.net/donate.html <http://www.team.net/donate.html>
> Archive: http://www.team.net/pipermail/tigers <http://www.team.net/pipermail/tigers> http://autox.team.net/archive <http://autox.team.net/archive>
> 
> Unsubscribe: http://autox.team.net/mailman/options/tigers/atwittsend@verizon.net <http://autox.team.net/mailman/options/tigers/atwittsend@verizon.net>
> 
> 
_______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/tigers/jay.laifman@gmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20200824/137dc75c/attachment-0001.htm>

------------------------------

Message: 2
Date: Mon, 24 Aug 2020 22:27:22 +0000
From: steve wick <srwick at hotmail.com>
To: "tigers at autox.team.net" <tigers at autox.team.net>, Tom Witt
    <atwittsend at verizon.net>
Subject: Re: [Tigers] Steering rack
Message-ID:
    <BYAPR06MB4726688E29CA6213A9A1EEF1D8560 at BYAPR06MB4726.namprd06.prod.outlook.com>

Content-Type: text/plain; charset="iso-8859-1"

What size do you need? A PEX clamp, available at plumbing/home supply stores may work, and is similar to what auto manufacturers use now.

[cid:d5e737fc-a7bd-4c11-b175-ac3df52da3fb]

This is from the McMaster-Carr catalog.

[cid:02be576d-669c-40d6-9f65-5cc9ff9e0cb8]

Steve

________________________________
From: Tigers <tigers-bounces at autox.team.net> on behalf of Tom Witt via Tigers <tigers at autox.team.net>
Sent: Monday, August 24, 2020 2:21 PM
To: tigers at autox.team.net <tigers at autox.team.net>
Subject: Re: [Tigers] Steering rack

Wanting something better than plastic zip ties to secure the boots I ventures to the world of hose clamps. You are correct most are too wide. I scoured through Pick Your Part and found certain BMW clamps (left in image) from the 80's/90's to not only be narrow enough, but also have a slight bevel on the edge. That said it was still a search to find the clamp in an appropriate diameter. I used these on my Tiger rack. I'd assume the midget rack boots are similar. Sorry I can't tell you the year/model and location the clamps were used but hopefully it helps with your search. Photo for comparison.

[cid:part1.6A2F5674.9E614D0F at verizon.net]

On 8/24/2020 6:42 AM, coolvt--- via Tigers wrote:

I have the MG Midget steering rack conversion.?? I need rubber boots.?? Does it take the same as a standard Tiger??? Also, what are good clamps that will work to secure??? Radiator clamps seem a little too wide and tend to cut into the boot.?? ??Thanks, Mark L

_______________________________________________

tigers at autox.team.net<mailto:tigers at autox.team.net>

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/tigers/atwittsend@verizon.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20200824/b4265bb0/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ichnfkdfppofgpgj.png
Type: image/png
Size: 1554373 bytes
Desc: ichnfkdfppofgpgj.png
URL: <http://autox.team.net/pipermail/tigers/attachments/20200824/b4265bb0/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 112678 bytes
Desc: image.png
URL: <http://autox.team.net/pipermail/tigers/attachments/20200824/b4265bb0/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 73960 bytes
Desc: image.png
URL: <http://autox.team.net/pipermail/tigers/attachments/20200824/b4265bb0/attachment-0002.png>

------------------------------

Subject: Digest Footer

_______________________________________________
Tigers mailing list
Tigers at autox.team.net
http://autox.team.net/mailman/listinfo/tigers

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive

------------------------------

End of Tigers Digest, Vol 13, Issue 188
***************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20200824/abacf34f/attachment-0001.htm>