[Tigers] Spare Tire Hold Down Bolt

[Ron Fraser]

Joe

                Mine is ½” – 13

 

This looks like a specialty stud to me.

 

½” for 2.4” down below the big cup shape

Bolt necks to 3/8” for .6” for the extra-long nut above the big cup

Nut is 1/2” long – nut must be welded on somehow

 

Ron Fraser

 

From: Tigers <tigers-bounces at autox.team.net> On Behalf Of Joe Brown via Tigers
Sent: Thursday, October 10, 2019 3:57 PM
To: Tigers Den <Tigers at autox.team.net>
Subject: [Tigers] Spare Tire Hold Down Bolt

 

Can somebody tell me what the thread size is for the spare tire hold down bolt?  The head snapped off mine when I was taking the car apart a long time ago and the rusty bolt had to be drilled out.  So I'm trying to figure out what size bolt to replace it with.

 

Thanks,

Joe Brown

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20191010/b1d6f074/attachment.htm>