[Tigers] Side molding fastners

[John Watertor]

Message: 1
Date: Thu, 14 Nov 2019 18:23:39 -0800
From: Gary <garywinblad at comcast.net>
To: John Watertor <h2otor at aol.com>
Cc: Tigers at autox.team.net
Subject: Re: [Tigers] Tiger side moulding fasteners more information
Message-ID: <1CC113DF-917D-4123-BE1A-B6E09A512F14 at comcast.net>
Content-Type: text/plain; charset="utf-8"

John,
The square head screws do not clamp, they
just do not in-snap!?  They let go of the
molding when you slide the molding.
Gary


Sent from my iPhone

> On Nov 14, 2019, at 5:11 PM, John Watertor via Tigers <tigers at autox.team.net> wrote:
>
> ?
> Davids photo's shows the side moulding rivets and fasteners I was talking about. Pictures RSCN1563.jpg shows the side moulding rivets and RSCN1567.jpg shows the square head clamping fasteners. Look for message
> at D or G at SBC on Nov 14.
> John Watertor
Are you sure the square headed fasteners don't clamp the chrome molding to the car body? On my Tiger the clamping fasteners were only on the front of the front molding, the rear of the rear molding and one on the door molding. The square headed fastners also had a flat and lock washer on the clamp. If they were not used to clamp the molding why did they go to all the trouble to use the clamping fasteners when they could use the metal rivet or the plastic fasteners?John Watertor
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20191122/ca993cf4/attachment.htm>