[Tigers] Wiring Question

[Will Seay]

Joe,

The ring terminal is a chassis ground.  It shares a mounting bolt with the
ignition ballast resistor mount.

Will - 382001570
Tigers at embarqmail.com


On Mon, Jun 17, 2019 at 4:05 PM Joe Brown via Tigers <tigers at autox.team.net>
wrote:

> Hey,
>
> I'm hooking up a PowerGen alternator and my wiring harness has two ground
> wires (actually three) that come out at the alternator.  One ring terminal
> has a single wire and it fits on the ground terminal of the alternator.
> The other ring terminal has two wires and a much larger ring terminal.  Any
> idea where this is supposed to attach?
> [image: image.png]
>
> FYI, I'm going to add additional wires to be able to carry the increased
> current of the new alternator.
>
> Thanks,
> Joe Brown
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
> http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/tigers@embarqmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20190617/8d6f1d22/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 364230 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20190617/8d6f1d22/attachment-0001.png>