[Tigers] Rod Bearings

[Joe Brown]

Sorry to keep bugging everybody.  The piston rods in the 260 have an oil
hole in the big end that gets covered up by a bearing.  I bought a set of
Sealed Power bearings and discovered that they do not have a hole that
would allow oil to come through from the rod.  I did some searching and it
looks like some brands of bearings have a hole and some don't.

I found the original Ford part number in the Tiger repair manual
(C2OZ-6211-H or J) and when I Google that number I find a lot of hits for
C2OZ-6211-R which shows bearings without holes.  The exploded drawing in
the Tiger manual looks like it is showing a bearing WITH a hole.  I don't
have the original bearings, so I don't know if they had the hole or not.

Does anybody know whether I can use the Sealed Power parts or should I go
get something with holes?

Thanks,
Joe Brown
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20190131/73621821/attachment.html>