[Tigers] Fuel Pump Access Door

[Ron Fraser]

Joe

                The cover on my Tiger just barely covers the opening at that corner; the rubber seal closes the opening.

 

Its possible you need to remount that cover, pushing it as far as you can to the inside with the Dzus fastener closed.

 

Ron Fraser

 

From: Tigers <tigers-bounces at autox.team.net> On Behalf Of Joe Brown via Tigers
Sent: Monday, January 14, 2019 10:59 AM
To: Larry Mayfield <drmayf at mayfco.com>; Tigers Den <Tigers at autox.team.net>
Subject: Re: [Tigers] Fuel Pump Access Door

 

 

 

My Tiger is a Mk1A, B382000217.  (And no, that is not the original fuel pump.  The original owner replaced it with a Carter pump and a Holley regulator)

 

Thanks,

Joe Brown

 

On Mon, Jan 14, 2019 at 6:32 AM <drmayf at mayfco.com <mailto:drmayf at mayfco.com> > wrote:

Joe, include a photo and the tiger model? Might help.
mayf

On 2019-01-13 13:52, Joe Brown via Tigers wrote:
> I keep finding weird stuff as I slowly get my Tiger put together.
> Today I attached the fuel pump access door to the body and I
> discovered that it doesn't completely cover the hole in the body.  One
> corner of the hole is exposed.  The access door has angled off corners
> and the hole in the body has squared off corners and one of these
> squared off corners is exposed.  Is this common?  Were these openings
> in the body cut by hand?
> 
> Now I have to come up with something to cover this slight gap.
> 
> Thanks,
> Joe Brown
> _______________________________________________
> 
> tigers at autox.team.net <mailto:tigers at autox.team.net> 
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers 
> http://autox.team.net/archive
> 
> Unsubscribe: 
> http://autox.team.net/mailman/options/tigers/drmayf@mayfco.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20190114/a81fc384/attachment.html>