[Tigers] Brake Booster Hose Clamps

[Joe Brown]

Thanks for the link. I'm going to try and clean up the old ones but it is
good to see a source for new ones.

Next question. The Book of Norman says most of the 1" hoses used a Ford
band clamps. Does anyone have a photo of an original clamp as used on the
water pump bypass hose? I don't really want to just use a worm gear clamp.

Thanks,
Joe

On Sat, Feb 16, 2019, 7:08 PM <jimmc13 at socket.net wrote:

> Joe:
>
> Try this url, a little pricey but they also state they have other sizes;
> 19mmin diameter, 5 mm wide, check it out...Cotter Pin Type hose  clamp.
>
> www.authenticclassics.com/
>
> Good luck.
>
> Jim McLaughlin
>
> B382000175 LRXFE
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> On 02/16/19, Joe Brown via Tigers wrote:
>
> Happy Saturday,
>
> What is this type of hose clamp called?  They were on the hose that went
> from the brake booster to the intake manifold.  I haven't seen anything
> like this anywhere else.
>
> [image: image.png]
>
> Thanks,
> Joe Brown
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20190216/adc69155/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 420603 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20190216/adc69155/attachment-0001.png>