[Tigers] spark pug wires

[phastphill at aol.com]

taylor 7mm trimmed to fit neatly....yes cut to length


-----Original Message-----
From: Tony Lang <achd73 at yahoo.com>
To: rfraser <rfraser at bluefrog.com>; tigers <tigers at Autox.Team.Net>; phastphill <phastphill at aol.com>
Sent: Wed, Feb 13, 2019 9:22 pm
Subject: Re: [Tigers] spark pug wires

Ron, your engine compartment looks wonderful and even better than that. I am curious about your plug wires as they appear to fit perfect. Are they a set you cut to length or a correctly fitting set you purchased? Seems every set I've purchased over the years that supposedly fit correctly never did and I prefer not to make my own. Any help from Ron and or others. TIA 
Tony Lang (TtT) 

    On Wednesday, February 13, 2019, 7:48:35 PM CST, phastphill--- via Tigers <tigers at autox.team.net> wrote:  
 
 look now


-----Original Message-----
From: Ron Fraser <rfraser at bluefrog.com>
To: phastphill <phastphill at aol.com>; tigers <tigers at Autox.Team.Net>
Sent: Wed, Feb 13, 2019 7:25 pm
Subject: RE: [Tigers] oil ine

                I went with the stock look, no surprise there I guess.I’m not sure the stainless steel style line was available way back then.  I happened to be in a Hydraulic line shop and notice a bulk box of black plastic tubing that looked exactly the stock tubing and it had a 3000 psi burst pressure.The hardest part was heating the plastic line and inserting the fittings.  40 some years now.   So it’s your chose; original style or stainless.  Ron Fraser  From: Tigers <tigers-bounces at autox.team.net> On Behalf Of phastphill--- via Tigers
Sent: Wednesday, February 13, 2019 12:09 PM
To: tigers at autox.team.net
Subject: [Tigers] oil ine  just broke my plastic oil line....fouled the steering column u-joint and broke  just leaving after lunch so motor not hot,still made a mess on all my new paint. question order a new plastic line from one of our sunbeam suppliers or go with braided lines from  jegs, summit etc they seem to have them all premade in different lengths.thanks......good thing happened close to home and i had some vise grips in my tool box....dynoed car last week made 230 hp and 255 lbs orig motor with f4b cam,headers at rear wheels with air cleaner,belt and mufflers on _______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/tigers/achd73@yahoo.com


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20190214/da94746b/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P1010132.JPG
Type: image/jpeg
Size: 610879 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20190214/da94746b/attachment-0001.jpe>