[Tigers] Transmission's Speedometer Gear Clamp

[D or G at sbc]

I was going by the Rootes parts book, which is apparently wrong.
David


      From: Joe Brown <jbbrown1980 at gmail.com>
 To: D or G at sbc <orr4sale at sbcglobal.net> 
 Sent: Wednesday, September 19, 2018 9:23 PM
 Subject: Re: [Tigers] Transmission's Speedometer Gear Clamp
   
On mine it is 1/4-20 5/8" long. I verified it on my transmission which is out of the car.. There is also a Tiger bolt list on one of the Tiger websites that says it is 1/4-20.
On Sep 19, 2018 10:43 PM, "D or G at sbc via Tigers" <tigers at autox.team.net> wrote:

5/16" coarse by about 3/4" long.
David

      From: Rob Hogan via Tigers <tigers at autox.team.net>
 To: Tiger's List <tigers at autox.team.net> 
 Sent: Wednesday, September 19, 2018 5:57 PM
 Subject: [Tigers] Transmission's Speedometer Gear Clamp
  
Anyone know what bolt diameter and thread pitch is used to bolt the speedometer gear clamp on to the side of the transmission?  It has been 35 years since it was last disassembled and 42 years since I last assembled it and I don't know what is needed anymore.  Accessing that bolt's hole is going to be a challenge._______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers

Unsubscribe: http://autox.team.net/mailman/options/tigers/orr4sale@sbcglobal.net




   _______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers

Unsubscribe: http://autox.team.net/mailman/options/tigers/jbbrown1980@gmail.com






   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20180920/49c7c2fd/attachment-0001.html>