[Tigers] Oil Pressure Hose/Fitting

[Bernard McNulty]

Try boiling hot water -- that ought to soften it without destroying it.

Tony McNulty


On 10/5/2018 10:23 AM, Richard Bruner via Tigers wrote:
> The oil pressure hose on my car cracked near the block, with a 
> predictable result.  I cut the cracked section off, and am trying to 
> get the old, brittle hose back on the barbed fitting.  I've tried a 
> lighter, a hair dryer and a heat gun so far, with no luck.  The hose 
> blisters before getting hot enough to go on the fitting.
>
> Any suggestions?
>
> Richard Bruner
>
>
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
>
> Unsubscribe: http://autox.team.net/mailman/options/tigers/bamcnulty@optonline.net
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20181005/6896c542/attachment.html>