[Tigers] Brake project, painting the discs

[Jay Laifman]

I’m not sure what you are thinking of when you say “modern”.  It is just a metal puck with smooth sides, and a groove on the top edge to match the dust cover.  I don’t see anything that can be improved. 

> On Mar 2, 2018, at 5:31 AM, coolvt--- via Tigers <tigers at autox.team.net> wrote:
> 
> That Volvo piston doesn't sound like it would be any less expensive than the Tiger. It seemed to me that with all of the vehicles using disc brakes over the past 50 years that there has to be something that used a piston with dimensions that matched the Tiger's. Something more modern and easily available.
> 
> In a message dated 3/1/2018 11:42:54 PM Eastern Standard Time, tigers at autox.team.net writes:
> 
> I recall there was a Volvo that used the same piston but it was stainless steel???  It seems it was the 120, 130, 220 and some 1800 series. This was a quick find so research further.  http://www.skandix.de/en/spare-parts/brakes/brake-calipers/piston-brake-caliper/1010679/
> _______________________________________________
> 
> tigers at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/tigers/coolvt@aol.com
> 
> 
> _______________________________________________
> 
> tigers at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/tigers/jay.laifman@gmail.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20180302/0606f41c/attachment.html>